Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-29T07:32:20.810Z Has data issue: false hasContentIssue false
  • English
  • Français

Aluminum-Ion Implantation into 4H-SiC (11-20) and (0001)

Published online by Cambridge University Press:  15 March 2011

Y. Negoro ,
T. Kimoto  and
H. Matsunami
Y. Negoro
Affiliation:
Department of Electronic Science and Engineering, Kyoto University, Kyotodaigaku-katsura, Nishikyo, Kyoto 615-8510, Japan
T. Kimoto
Affiliation:
Department of Electronic Science and Engineering, Kyoto University, Kyotodaigaku-katsura, Nishikyo, Kyoto 615-8510, Japan
H. Matsunami
Affiliation:
Department of Electronic Science and Engineering, Kyoto University, Kyotodaigaku-katsura, Nishikyo, Kyoto 615-8510, Japan
Get access

Abstract

High-dose aluminum-ion (Al+) implantation into 4H-SiC (11-20) and (0001) has been investigated. Surface morphologies of implanted (0001) samples were improved by annealing with a graphite cap. Implant-dose dependence and annealing-time dependence of electrical properties are examined by Hall-effect measurements. A low sheet resistance of 2.3 kΩ/sq. was obtained in (0001) by high-dose Al+ implantation at 500 °C with a dose of 3.0 × 1016 cm−2 and high-temperature annealing at 1800 °C for a short time of 1 min. In the case of (11-20), even room-temperature implantation brought a low sheet resistance below 2 kΩ/sq. after annealing at 1800 °C.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 815 , 2004 , J5.2
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Palmour, J. W., Lipkin, L. A., Singh, R., Slater, D. B., Suvorov, A. V., and Carter, C. H., Diamond and Related Materials, 6, 1400 (1997).Google Scholar
2. Tone, K. and Zhao, J. H., IEEE Trans. Electron Devices, 46, 612 (1999).Google Scholar
3. Yano, H., Hirao, T., Kimoto, T., Matsunami, H., Asano, K., and Sugawara, Y., IEEE Electron Device Lett., 20, 611 (2002).Google Scholar
4. Schmid, F., Laube, M., Pensl, G., Wagner, G., and Maier, M., J. Appl. Phys., 91, 9182 (2002).Google Scholar
5. Negoro, Y., Miyamoto, N., Kimoto, T., and Matsunami, H., Appl. Phys. Lett., 80, 240 (2002).Google Scholar
6. Satoh, M., Nakaike, Y., and Nakamura, T., J. Appl. Phys., 89, 1986 (2001).Google Scholar
7. Negoro, Y., Katsumoto, K., Kimoto, T., and Matsunami, H., Mater. Sci. Forum, (2004) (in press).Google Scholar
8. Troffer, T., Schadt, M., Frank, T., Itho, H., Pensl, G., Heindl, J., Strunk, H. P., and Maier, M., phys. stat. sol. (a), 162, 277 (1997).Google Scholar
9. Tanaka, H., Tanimoto, S., Yamanaka, M., and Hoshi, M., Mater. Sci. Forum, 389–393, 803 (2002).Google Scholar
10. Son, N. T., Hai, P. N., Chen, W. M., Hallin, C., Monemar, B., and Janzén, E., Physical Review B 61, 10554 (2000).Google Scholar