Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-29T07:06:34.623Z Has data issue: false hasContentIssue false
  • English
  • Français

Alumina-Doped Silica Gradient-Index (GRIN) Lenses by Slurry-Based Three-Dimensional Printing (S-3DP™)

Published online by Cambridge University Press:  11 February 2011

Hong-Ren Wang ,
Michael J. Cima  and
Emanuel M. Sachs
Hong-Ren Wang
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139
Michael J. Cima
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139
Emanuel M. Sachs
Affiliation:
Department of Mechanical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139
Get access

Abstract

The traditional Slurry-based Three-dimensional Printing (S-3DP™) process has been used to fabricate complex structure materials by printing organic binders in selected positions on each printing layer. This process is modified to fabricate functional graded materials, such as gradient index (GRIN) lenses, by depositing different concentrations of dopant at different positions. The modified S-3DP™ process offers advantages over conventional GRIN lens processes, including reduced processing time, improved compositional flexibility, and increased index profile dimensionality. Two different approximately parabolic dopant concentration profiles, which have maximum alumina concentrations of 1.63 mol% and 2.50 mol%, are printed into silica powder beds using S-3DP™. The samples with maximum alumina concentration of 1.63 mol% have been sintered into optical transparency at 1650 0C for 30 minutes in a vacuum furnace (5×10-6 torr) while an additional dehydration process before sintering was required for the samples with maximum alumina concentration of 2.50 mol%. The magnifying effects of GRIN lenses with profiles of 1.63 mol% and 2.50 mol% alumina were observed, yielding effective focal lengths of 10 cm and 6.1 cm, respectively. Light diffraction, which results from the locally inhomogeneous dopant distribution and reduces the optical quality of GRIN lenses, was also observed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 758: Symposium LL – Rapid Prototyping Technologies , 2002 , LL1.5
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Simmons, J. H. and et al., Applied Optics, 18 [16] 2732–2733 (1979).Google Scholar
2. Kitano, I. and et al., J. Japan Soc. App. Phys., 39, 63–70 (1970).Google Scholar
3. Samuels, J. E. and Moore, D.T., Applied Optics, 29 [28] 4042–4050 (1990).Google Scholar
4. Ohmi, S. and et al., Applied Optics, 27, [3] 496–499 (1988).Google Scholar
5. Houde-Walter, S. N. and Moore, D.T., Applied Optics, 25 [19] 3373–3378 (1986).Google Scholar
6. Cooper, A. R. and el-Leil, M.A., Applied Optics, 19 [7] 1087–1091 (1980).Google Scholar
7. Pearson, A. D., French, W.G., and Rawson, E.G., Applied Physics Letters, 15 [2] 76–77 (1969).Google Scholar
8. Yamane, M. and et al., SPIE Optical Engineering Press, 1993.Google Scholar
9. Che, T. M., Caldwell, J.B., and Mininni, R.M., Sol-Gel Optics, 1328, 145–159 (1990).Google Scholar
10. MacDowell, J. F. and Beall, G. H., J. Am. Ceram. Soc., 52 [1] 17–25 (1969).Google Scholar
11. Hecht, E., “Optics,” 4th edition, Addison-Wesley, 2002.Google Scholar
12. Saleh, B. E. A. and Teich, M. C., “Fundamentals of Photonics,” John Wiley & Sons Inc., New York, 1991.Google Scholar
13. Nassau, K., Shiever, J. W., and Krause, J. T., J. Am. Ceram. Soc., 58 [9–10] 461 (1975).Google Scholar