Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-25T17:57:50.006Z Has data issue: false hasContentIssue false
  • English
  • Français

Alloys based on NiAl for High Temperature Applications

Published online by Cambridge University Press:  21 February 2011

K. Vedula ,
V. Pathare ,
I. Aslanidis  and
R. H. Titran
K. Vedula
Affiliation:
Department of Metallurgy and Materials Science, Case Western Reserve University, Cleveland, Ohio
V. Pathare
Affiliation:
Department of Metallurgy and Materials Science, Case Western Reserve University, Cleveland, Ohio
I. Aslanidis
Affiliation:
Department of Metallurgy and Materials Science, Case Western Reserve University, Cleveland, Ohio
R. H. Titran
Affiliation:
NASA Lewis Research Center, Cleveland, Ohio
Get access

Abstract

This paper presents some of the results obtained in an on-going study of NiAl alloys for potential high temperature applications. Alloys were prepared by powder metallurgy techniques. Flow stress values at slow strain rates and high temperatures were measured. Some promising ternary alloying additions (Hf, Ta and Nb) have been identified. The mechanism of strengthening in alloys containing these additions appears to be a form of particle dislocation interaction. Interesting effects of grain size and stoichiometry in binary alloys are also presented.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 39: Symposium G – High-Temperature Ordered Intermetallic Alloys I , 1984 , 411
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hansen, Handbook of Binary Phase Diagrams.Google Scholar
2. Pathare, V. M., Vedula, K. M. and Titran, R. H., to be published in Proceedings of the International Powder Metallurgical Conference, Toronto, June 1984.Google Scholar
3. Bradley, A. J. and Taylor, A., Proc. Roy. Soc., 103, (1956), p. 54.Google Scholar
4. Cooper, M. J., Phil. Mag., 8, (1963), p. 805.CrossRefGoogle Scholar
5. Vandervoort, R. R., Mukherjee, A. K. and Dorn, J. E., Trans. Amer. Soc. Metals, 59, (1966), p. 930.Google Scholar
6. Whittenberger, J. D., Mat. Sci. and Engg., 57, (1983), p. 77.CrossRefGoogle Scholar
7. Grala, E. M., “Mechanical Properties of Intermetallic Compounds”, ed. Westbrook, J. H., John Wiley & Sons, New York, 1960, p. 358.Google Scholar
8. Lautenschlager, E. P., Kiewit, D. A. and Brittain, J. O., Trans. Met. Soc. AIME, 233, (1965), p. 1297.Google Scholar
9. Westbrook, J. H. and Wood, D. L., J. Inst. Metals, 91, (1962), p.174.Google Scholar