Hostname: page-component-cd9895bd7-gxg78 Total loading time: 0 Render date: 2024-12-27T02:11:26.095Z Has data issue: false hasContentIssue false
  • English
  • Français

Alkali Activated Slag And Portland/Slag Ultrafine Cement

Published online by Cambridge University Press:  21 February 2011

William J. Clarke  and
Maan Helal
William J. Clarke
Affiliation:
Geochemical Corporation, 162 Spencer Place, Ridgewood, New Jersey 07450
Maan Helal
Affiliation:
Northwestern University, Civil Engineering Department, Evanston, Illinois 60201.
Get access

Abstract

Ultrafine Alkali Activated Slag (AAS) and Portland/Slag (P/S) cements have been commercially available in the United States for 2 and 5 years, respectively. Ultrafine cements have been the subject of research at Northwestern University for 6 years.

Particle size of the ultrafine slag cement is characterized by 98% passing at 7 microns and a D50 at 3 microns in contrast to the ultrafine portland/slag cement which has 98% passing at 10 microns and a D50 at 4 microns.

The chemical composition of the slag used in these cements is 35% SiO2, 16% Al2O3, and 43% CaO. The composition of the portland/slag cement, which is a 25/75 blend, is therefore between the bulk composition of portland cement and the slag.

Both of the ultrafine cements permeate fine sands when formulated at high water-to-cement ratios. Viscosity plays an important part in the permeation mechanism, and both cements exhibit viscosities below 10 cps at water-to-cement ratios of 2. This low viscosity is obtained through the use of superplasticizing with naphthalene sulfonate and acrylic acid polymers.

Applications of the ultrafine cements include dam grout curtain rehabilitation, consolidation grouting, and nuclear and hazardous waste containment. One hundred and twenty metric tonnes of the portland/slag cement have been used for hazardous waste containment at Niagara Falls, New York.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 179: Symposium Y – Specialty Cements with Advanced Properties , 1989 , 219
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Talling, B., and Brandstetr, J., “Present State and Future of Alkali-Activated Slag Concretes,” Third Int. Conf. Canmet/ACI Trondheim, Norway, SP–114, pp. 1519–1545 (1989).Google Scholar
2. Mongilardi, E., and Tomaghi, R., “Construction of Large Underground Openings and Use of Grouts,” Proc. Conf. on Deep Foundations, Beijing, China, 19 pp. (1986).Google Scholar
3. Krizek, R.J. and Helal, M., “Some Properties of Microfine Cement Grouts,” Second Annual Short Course, Grouting Practice, University of Wisconsin-Milwaukee, 30 pp., October 30–31 (1989).Google Scholar
4. Clarke, W. J., “Performance Characteristics of Microfine Cement,” Preprint 84–023, ASCE Geotechnical Conf., Atlanta, GA, May 14–18, 14 pp. (1984).Google Scholar
5. Clarke, W. J., “Microfine Cement Technology,” .23rd Int. Cement Seminar, Atlanta, GA, December 6–9, 13 pp. (1987).Google Scholar