Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-25T15:38:58.581Z Has data issue: false hasContentIssue false

Aggressively Scaled P-Channel Mosfets With Stacked Nitride-Oxide-Nitride, N/O/N, Gate Dielectrics

Published online by Cambridge University Press:  10 February 2011

Yider Wu
Affiliation:
Departments of Electrical and Computer Engineering, and Physics, North Carolina State University, Raleigh, NC 27695-8202, USA
Gerald Lucovsky
Affiliation:
Departments of Electrical and Computer Engineering, and Physics, North Carolina State University, Raleigh, NC 27695-8202, USA
Get access

Abstract

Ultrathin (tox,eq < 2.0 nm) Si3N4/SiO2(hereafter N/O) gate dielectrics with improved interface characteristics compared to devices with thermal oxides have been formed by remote plasma enhanced CVD of Si3N4onto oxides. If the Si-Si02 interface is intentionally nitrided prior to the Si3N4deposition, the increased physical thickness of the N/O stack combined with the interfacial nitridation reduces the direct tunneling current by more than two orders of magnitude. The ensuing device structure can then be characterized as N/O/N. The top nitride layer is also an effective boron diffusion barrier improving short channel characteristics in p+-poly PMOSFETs. In addition, nitrogen can also be transported to the silicon/dielectric interface during post-deposition RTAs, and this reduces degradation of transconductance during hot carrier stressing.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Hu, G. and Bruce, R., IEEE Trans. Elec. Dev. ED-32, 584 (1985).Google Scholar
[2] Wolf, S., Silicon procession for the VLSI Era, Vol. 3, Lattice Press, Sunset Beach, CA, p. 311, (1995).Google Scholar
[3] Pfiester, J. and Baker, F., IEEE Elec. Dev. Lett. 11, 247 (1990).10.1109/55.55269Google Scholar
[4] Mogami, T., Johansson, L., Sakai, I., and Fukuma, M., IEDM Tech. Dig. 533 (1991).Google Scholar
[5] Vogel, E., McLarty, P., and Wortman, J., IEEE Tran. Elec. Dev. ED- 43, 753 (1996).10.1109/16.491252Google Scholar
[6] Wu, Y. and Lucovsky, G., IEEE International Reliability Physics Symposium 70, (1998).Google Scholar
[7] Lo, S., Buchanan, D., Taur, Y., and Wang, W., IEEE Elec. Dev. Lett. 18, 209 (1997).10.1109/55.568766Google Scholar
[8] Alers, G., Werder, D., and Chabal, Y., Appl. Phys. Lett 73, 1517 (1998).10.1063/1.122191Google Scholar
[9] Hubbard, K. and Schlom, D., J. Mater. Res. 11, 2757 (1996).10.1557/JMR.1996.0350Google Scholar
[10] Parker, C., Lucovsky, G., and Hauser, J., IEEE Elec. Dev. Lett. 19, 106 (1998).10.1109/55.663529Google Scholar
[11] Ma, Y., Yasuda, T., and Lucovsky, G., Appl. Phys. Lett. 64, 2226 (1994).10.1063/1.111681Google Scholar
[12] Hattangady, S.V, Niimi, H. and Lucovsky, G., J. Vac. Sci. Technol. A 14, 3017 (1996).10.1116/1.580165Google Scholar
[13] Hattangady, S.V., Niimi, H., and Lucovsky, G., Appl. Phys. Lett. 66, 3495 (1995).10.1063/1.113775Google Scholar
[14] Wu, Y. and Lucovsky, G., IEEE Elec. Dev. Lett 19, 367 (1998).10.1109/55.720188Google Scholar
[15] Hauser, J., IEEE TED, 44, 1009 (1997)10.1109/16.585558Google Scholar
[16] Green, M. L. et al. , Appl. Phys. Lett. 65, 848, (1994).10.1063/1.112980Google Scholar
[17] Wristers, D., Han, L., and Kwong, D., Appl. Phys. Lett. 68, 2094 (1996).10.1063/1.115595Google Scholar
[18] Lucovsky, G. et al. Appl. Phys. Lett. 74 (April 5, 1999).10.1063/1.123728Google Scholar
[19] Yang, H., Niimi, H., Wu, Y. and Lucovsky, G., submitted to IEEE Elec. Dev. Lett. (1999).Google Scholar