Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-25T17:26:11.687Z Has data issue: false hasContentIssue false
  • English
  • Français

Adsorption of Carbon-14 on Mortar

Published online by Cambridge University Press:  15 February 2011

Junko Matsumoto ,
Tsunetaka Banba  and
Susumu Muraoka
Junko Matsumoto
Affiliation:
Department of Environmental Safety Research, Japan Atomic Energy Research Institute, To-kai, Ibaraki 319–11, Japan.
Tsunetaka Banba
Affiliation:
Department of Environmental Safety Research, Japan Atomic Energy Research Institute, To-kai, Ibaraki 319–11, Japan.
Susumu Muraoka
Affiliation:
Department of Environmental Safety Research, Japan Atomic Energy Research Institute, To-kai, Ibaraki 319–11, Japan.
Get access

Abstract

The sorption experiments of carbon-14 on the mortar grain (grain size : 0.50 – 1.0 mm) focused on the chemical form of the carbon-14 were carried out by the batch method. Three kinds of carbon-14 chemical form were used for the experiments : sodium carbonate (Na214CO3) as the inorganic radiocarbon, and sodium acetate (CH314COONa) and acetaldehyde (14CH314CHO) as the organic radiocarbons. 0.30 gram samples of mortar were soaked in the solution with carbon-14 at 15°C for periods of up to 160 days. At the end of each run, carbon-14 concentrations in the supernatants were determined before and after centrifugation (3,500 rpm., 1 hr.).

In the mortar-sodium carbonate system, the retention process of carbon-14 related to reaction on the surface of the mortar was speculated as follows. First, 3CaO-SiO2. and 2CaO-SiO2, of the mortar components contact with water and produce Ca(OH)2. Ca(OH)2 produces Ca2+ and OH− in the solution. Then, calcite forms from Ca2+ and CO32− in the solution. Thus, the sorption ratio of carbon-14 onto mortar will be high until mortar nas been completely carbonated because Ca2+ is rich in the mortar and the solubility of calcite is low.

In the mortar-organic carbon system, the soluble organic carbon-14 is hardly sorbed on the surface of the mortar. Therefore, the cementitious materials may not inhibit the release of organic radiocarbons from the low-level radioactive wastes, contrary to the case of inorganic radiocarbon.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 353: Symposium – Scientific Basis for Nuclear Waste Management XVIII , 1994 , 1029
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Grahlke, J. M., et al., U. S. Environmental Protection Agency, U.S.A. Report No. PB87-228052(1986)Google Scholar
2. Norrby, S., et al, Swedish Nuclear power Inspectorate, Sweden, Report No. SKI 88:2 (1988)Google Scholar
3. Bush, R. P. et al., Atomic Energy Research Establishment, Harwell, United Kingdom, Report No. AERE-R 10543 (1984)Google Scholar
4. Unpublished DataGoogle Scholar
5. Suzuki, A., in Waste Management ’91 Proceeding, edited by Post, R. G., (Arizona Board of Regents, U.S.A., 1991), p. 27 Google Scholar
6. Banba, T., Matsumoto, J. and Muraoka, S., Cem. Concr. Res., 22, 381 (1992)Google Scholar
7. Kita, T. et al., Series of Durability in Concrete Structure “Carbonation”. in Japanese, Gihodo(1986)Google Scholar