Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-25T18:51:40.149Z Has data issue: false hasContentIssue false
  • English
  • Français

Adhesion Improvement of CVD Diamond Coatings on WC-Co Substrates for Machining Applications

Published online by Cambridge University Press:  01 February 2011

Zhenqing Xu ,
Ashok Kumar ,
Leonid Lev ,
Michael Lukitsch  and
Arun Sikder
Zhenqing Xu
Affiliation:
Department of Mechanical Engineering, University of South Florida, Tampa, FL, 33620, USA Nanomaterials and Nanomanufacturing Research Center, University of South Florida, Tampa, FL, 33620, USA
Ashok Kumar
Affiliation:
Department of Mechanical Engineering, University of South Florida, Tampa, FL, 33620, USA Nanomaterials and Nanomanufacturing Research Center, University of South Florida, Tampa, FL, 33620, USA
Leonid Lev
Affiliation:
General Motors Corporation, Warren, MI 48090, USA
Michael Lukitsch
Affiliation:
General Motors Corporation, Warren, MI 48090, USA
Arun Sikder
Affiliation:
Nanomaterials and Nanomanufacturing Research Center, University of South Florida, Tampa, FL, 33620, USA
Get access

Abstract

In order to improve the performance of WC-Co cutting tools, high quality microcrystalline diamond coatings were produced using microwave plasma enhanced chemical vapor deposition (MPECVD) method. The adhesion of the diamond film deposited on the substrate has been considered to play an important role in the performance of the cutting tools in machining applications. A thin layer of Cr was coated on the WC-Co substrate before the diamond deposition; 75 μm diamond powders were sandblasted on the surface at 40 Psi to increase the nucleation density. Diamond film has been successfully deposited on the substrate at temperature around 750°C with 1.5 % CH4 in Hydrogen plasma. Scanning electron microscopy (SEM) has been used to study the surface morphology and Raman spectroscopy has been performed to characterize the quality of the diamond films and measure the residual stress. The adhesion of the diamond film has been evaluated by Rockwell indentation test. The results indicated that film grown on the Cr interlayer with diamond powder sandblasting has much better adhesion strength.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 843: Symposium T – Surface Engineering-Fundamentals and Applications , 2004 , T3.33
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Leyendecker, T., Lemmer, O., Jurgens, A., Esser, S., Ebberink, J., Surf. Coat. Technol. 48, 253 (1991).Google Scholar
2. Murakawa, M., Takeuchi, S., Surf. Coat. Technol. 49, 359 (1991).Google Scholar
3. Reineck, J., Soderbery, S., Eckholm, P., Westergren, K., Surf. Coat. Technol. 57, 47 (1993).Google Scholar
4. Kanda, K., Takehana, S., Yoshida, S., Watanabe, R., Takano, S., Ando, H., Shimakura, F., Surf. Coat. Technol. 73. 115 (1995).Google Scholar
5. Amirhaghi, S., Reehal, H.S., Wood, R.J.K., Wheeler, D.W., Surf. Coat. Technol. 135, 126 (2001).Google Scholar
6. Haubner, R., Lux, B., Int. J. Refract. Metal Hard Mater. 5, 111 (1996).Google Scholar
7. Ma, Z., Wang, J., Wu, Q. and Wang, C., Thin Solid Films, 390, 104 (2001).Google Scholar
8. Raghuveer, M.S., Yoganand, S.N., Jagannadham, K., Lemaster, R.L. and Bailey, J., Wear, 253, 1194 (2002).Google Scholar
9. Ahmed, W., Sein, H., Ali, N., Gracio, J. and Woodwards, R., Diamond Relat. Mater. 12, 1300 (2003).Google Scholar
10. Sein, H, Ahmed, W., Jackson, M., Woodwards, R., Polini, R., Thin Solid Films, 447, 455 (2004).Google Scholar
11. Silva, S., Mammana, V. P., Salvadori, M. C., Monteiro, O. R. and Brown, I. G., Diamond Relat. Mater. 8, 1913 (1999).Google Scholar
12. Drory, M. D. and Hutchinson, J. W., Science 263, 1753 (1994).Google Scholar
13. Ralchenko, V.G., Smolin, A.A., Pereverzev, V.G., Obraztsova, E.D., Korotoushenko, K.G., Diamond Relat. Mater. 4, 754 (1995)Google Scholar