Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-25T18:42:32.185Z Has data issue: false hasContentIssue false
  • English
  • Français

Adhesion Between Concrete and Treated or Untreated Flat Metal Surfaces

Published online by Cambridge University Press:  21 February 2011

D. G. Montgomery  and
A. Samarin
D. G. Montgomery
Affiliation:
University of Wollongong, Department of Civil & Mining Engineering, Wollongong, N.S.W. 2500, Australia
A. Samarin
Affiliation:
Boral Research, Wentworthville, N.S.W. 2145, Australia
Get access

Abstract

Modern construction techniques for floor and slab systems often make use of the composite action developed between steel and concrete. Knowledge of the magnitude of adhesive force, other than mechanical bond, is necessary in the design of permanent steel formwork, which ultimately becomes an integral part of the load bearing reinforced concrete structure. To investigate the extent of adhesion at the interface between concrete and flat metal surfaces, different treatments of the metal surfaces were considered. Results are presented for six types of treated and untreated metal plates when tested in a pull-off mode with conventional concrete. The mode and the type of failures were investigated, and those parameters, which are considered to be significant in the study of this phenomenon, evaluated

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 114: Symposium R – Bonding in Cementitious Composites , 1987 , 263
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Monteiro, P.J.M., Maso, J.C. and Ollivier, J.P., Cem. Concr. Res., 15, 953 (1985).Google Scholar
2. Nakayama, M. and Beaudoin, J.J., Cem. Concr. Res., 17, 478 (1987).Google Scholar
3. Bridge, R.Q., Steel Construction, 18. 1,2 (1983).Google Scholar
4. Ong, K.C.G. and Mansur, M.A., Proc. Ninth Australasian Conf., Mech. and Structures, Sydney, 215 (1984).Google Scholar
5. Massazza, F. and Costa, U., 8th Int. Cong. on Chemistry of Cement, Brazil, Vol.1, 2.3 (1986).Google Scholar
6. Arliquie, G. and Grandet, J., Coll. Int. Liaisons Pates de Ciment Matdriaux Associés, Toulouse, A.33 (1982).Google Scholar
7. Khalaf, M.N.Al and Page, C.L., Cem. Concr. Res., 9, 197 (1979).Google Scholar