Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-25T18:49:40.377Z Has data issue: false hasContentIssue false
  • English
  • Français

Active Si Interposer : Combination of Through-Si Vias and Redistribution

Published online by Cambridge University Press:  26 February 2011

Kazumi Hara ,
Nobuaki Hashimoto ,
Haruki Ito ,
Yoshihiko Yokoyama  and
Tsuyoshi Imamura
Kazumi Hara
Affiliation:
[email protected], Seiko Epson corporation, Advanced Technology Development Center, 1010 Fujimi,Fujimi-machi, Suwa-gun, Nagano-ken, 399-0295, Japan, 81-266-62-7534, 81-266-62-4415
Nobuaki Hashimoto
Affiliation:
[email protected], Seiko Epson corporation, Advanced Technology Development Center, SUWA MINAMI Plant 1010 Fujimi,Fujimi-machi,, Suwa-gun, Nagano-ken, 399-0295, Japan
Haruki Ito
Affiliation:
[email protected], Seiko Epson corporation, Advanced Technology Development Center, SUWA MINAMI Plant 1010 Fujimi,Fujimi-machi,, Suwa-gun, Nagano-ken, 399-0295, Japan
Yoshihiko Yokoyama
Affiliation:
[email protected], Seiko Epson corporation, Advanced Technology Development Center, SUWA MINAMI Plant 1010 Fujimi,Fujimi-machi,, Suwa-gun, Nagano-ken, 399-0295, Japan
Tsuyoshi Imamura
Affiliation:
[email protected], Seiko Epson corporation, Advanced Technology Development Center, SUWA MINAMI Plant 1010 Fujimi,Fujimi-machi, Suwa-gun, Nagano-ken, 399-0295, Japan
Get access

Abstract

Active Si Interposers (ASI), which are device chips with through Si vias (TSVs) and redistribution wirings, are the focus of this study. A feature of the module is that the redistribution layer includes a stress buffer layer so that stress can be alleviated when it is mounted on a motherboard. For the purpose of this study, it was decided to conduct the process from the backside of the wafer for efficiency of production. One feature of this process is that a device wafer was processed with a glass wafer supported throughout the TSVs' process in order to facilitate process of a thin wafer. However, the maximum temperature of each process was limited. We addressed this problem by the optimization of some of the equipment and the modification of the adhesive that attaches the device wafer to a glass wafer. Finally, a module that was a combination with the ASI and a certain device operated normally. In the last part of this study, the results of the evaluation that studied the impact on the devices of the TSVs' process are presented.

Keywords

packagingdevicessemiconducting
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 970: Symposium Y – Enabling Technologies for 3-D Integration , 2006 , 0970-Y05-03
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bower, C. A., Malta, D., Temple, D., Robinson, J. E., Coffman, P. R., Shokan, M. R., Welch, d T. B.,; “High Density Vertical Interconnects for 3-D Integration of Si Integrated Circuits”, Proc.56th Electronic Components & Technology conference 2006, Vol.1, p.399–403.Google Scholar
2. Tanaka, N., Yoshimura, Y.,;“Low-Cost Through-hole Electrode Interconnection for 3DSiP Using Room-temperature Bonding”, Proc.56th Electronic Components & Technology conference 2006, Vol.1, p.814–818.Google Scholar
3. Sekiguchi, M., Numata, H., Sato, N., Shirakawa, T., Matsuo, M., Yoshikawa, H., Yanagida, M., Nakayoshi, H., Takahashi, K.,; “Novel Low Cost Integration of Through Chip Chips with crack (a) The case that measures for electrostatic charge was taken. Figure 9.The failure distribution in the experimental production (b) The case that measures for electrostatic charge was not taken Interconnection and Application to CMOS Image Sensor”, Proc.56th Electronic Components & Technology conference 2006, Vol.2, p.1367–1374.Google Scholar
4. “ASET Annual Research Report,” ASET, Tokyo, Japan, 2004.Google Scholar
5. Hara, K., Kurashima, Y., Hashimoto, N., Masui, K., Miyazawa, I., Kobayashi, T., Yokoyama, Y., Fukazawa, M.,; “Optimization for Chip Stack in 3D Packaging”, IEEE Trans. Advanced Packaging Vol.28, No.3, Aug.2005, p.367–376 Google Scholar
6. Miyazawa, I., “Development of die level stacked packaging,” in ICEP, 2003, p. 320–325.Google Scholar
7. Hara, K., Hashimoto, N., Yamaguchi, K., Kobayashi, T., Yokoyama, Y., Fukazawa, M.; “The Optimization of Terminal Structure for Interconnections in 3D Packaging Technology with Through-Silicon Vias” in ICEP, 2005, p.161–166.Google Scholar
8. Kessel, C. R., Behr, A. H., Hoffend, T.R., Saito, K., Akiyama, R., Takamori, K., Iwasawa, M.,; “Wafer Thinning with the 3M Wafer Support System”, Proc. IWLPC, 2004.Google Scholar