Article contents
X-Ray Fluorescence Microtomography on a SiC Nuclear Fuel Shell
Published online by Cambridge University Press: 10 February 2011
Abstract
TRISO fuel particles contain a small kernel of nuclear fuel encapsulated by alternating layers of C and a barrier layer of SiC. The TRISO fuel particle is used in an advanced nuclear fuel where the SiC shell provides the primary barrier for radioactive elements in the kernel. The performance of this barrier is key to containment. We have used x-ray fluorescence microtomography to measure the trace element distribution in a SiC shell. Prior to our measurements the nuclear fuel and C layers were leached from the particle. The shell was then encapsulated by kapton tape to simplify handling. The shell was mounted on a glass fiber and measurements were made with an ∼1 x3 ωm2 x-ray probe on beamline 2-ID at the APS. The distribution of trace elements in the SIC shell was reconstructed after correcting the data for artifacts arising from absorption and scattering off the kapton tape. The observed trace elements are distributed in small <1ωm regions through the SiC shell. The trace elements can be attributed to radiation enhanced diffusion of elements in the kernel or to trace elements introduced during fabrication. X-ray fluorescence microtomography is an ideal tool for this work because it is a penetrating nondestructive probe sensitive to trace elements in a low Z matrix and because it provides a picture of the elemental distribution in the shell.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1998
References
REFERENCES
- 2
- Cited by