Hostname: page-component-cd9895bd7-mkpzs Total loading time: 0 Render date: 2024-12-27T02:28:32.807Z Has data issue: false hasContentIssue false
  • English
  • Français

Void Morphology In NiAl

Published online by Cambridge University Press:  21 March 2011

M. Zakaria  and
P.R. Munroe
M. Zakaria
Affiliation:
Electron Microscope Unit, University of New South Wales, Sydney NSW 2052, Australia
P.R. Munroe
Affiliation:
Electron Microscope Unit, University of New South Wales, Sydney NSW 2052, Australia
Get access

Abstract

Void formation in stoichiometric NiAl was studied through controlled heat treatments and transmission electron microscopy. Voids formed at temperatures as low as 400°C, but dissolved during annealing at 900°C. Both cuboidal and rhombic dodecahedral voids were observed, often at the same annealing temperature. At higher annealing temperatures (>800°C) extensive dislocation climb was noted. The relative incidence of void formation and dislocation climb can be related to the mobility of vacancies at each annealing temperature. Further, differences in void shape can be described in terms of their relative surface energy and mode of nucleation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 646 , 2000 , N5.6.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Yang, W., Dodd, R.A. and Strutt, P.R., Metall. Trans. 3A, 2049 (1972).Google Scholar
2. Yang, W. and Dodd, R.A., Scripta. Metall. 8, 237 (1974).Google Scholar
3. Epperson, J.E., Gerstenberg, K.W., Berner, D., Kostroz, G. and Ortiz, C., Phil. Mag. A 38, 529 (1978).Google Scholar
4. Parthasarathi, A. and Fraser, H.L., Phil. Mag. A 50, 89 (1984).Google Scholar
5. Eibner, J.E., Engell, H.J., Schultz, H., Jacobi, H. and Schlatte, G., G. Phil. Mag. 31, 739 (1975).Google Scholar
6. Ball, A. and Smallman, R.E., Acta. Metall. 14, 1517 (1966).Google Scholar
7. Marshall, G.W. and Brittain, J.O, Metall. Trans. 7A, 1013 (1976).Google Scholar
8. Tisone, T.C., Marshall, G.W. and Brittain, J.O, J. Applied Phys. 39, 3714 (1968).Google Scholar
9. Zakaria, M. and Munroe, P.R., J. Mater. Sci., in submission (2000).Google Scholar
10. Clapp, P.C., Rubins, M.J., Charpenay, S., Rifkin, J.A. and Yu, Z.Z., in High Temperature Ordered Intermetallic Alloys III, edited by Liu, C.T., Taub, A.I., Stoloff, N.S. and Koch, C.C., (Mater. Res. Soc. Proc. 133, Pittsburgh PA, 1989) pp. 29–35.Google Scholar
11. Fu, C.L., Ye, Y.Y. and Yoo, M.H., in High Temperature Ordered Intermetallic Alloys V edited by Baker, I., Darolia, R., Whittenberger, J.D. and Yoo, M.H., (Mater. Res. Soc. Proc. 288, Pittsburgh PA, 1993) pp. 21–32.Google Scholar