Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-06T09:00:50.032Z Has data issue: false hasContentIssue false

Vacuum Deposited Erbium-Doped NIR Luminescent Organic Thin Films For 1.5 μm Optical Amplification Applications

Published online by Cambridge University Press:  19 July 2011

Laurent Divay
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Christophe Galindo
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Evelyne Chastaing
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Renato Bisaro
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Frédéric Wyczisk
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Pierre Le Barny
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Get access

Abstract

Inorganic erbium-doped glasses are widely used in telecommunications due to the sharp intra-atomic 4I13/24I15/2 transition in the 4f orbital of erbium resulting in an emission at ∼ 1.5 μm, which is the low loss window of silica optical fibres. The limited erbium concentration of about 1020 ions.cm−3 in inorganic erbium-doped glasses and the low absorption coefficient of the Er3+ ions, imply that relatively long lengths of fibre are required. The organic erbium complexes present higher absorption cross sections due to the photosensitization of erbium by organic conjugated ligands and broader emission bands than those of the free Er3+ ion. Such properties open the possibility to develop compact, low power and broadband infrared emitting devices. We present the study of a highly doped organic thin film obtained from organic erbium complexes deposited by a vacuum sublimation technique. This deposition method allows the realization of an erbium-doped thin film without the help of an organic polymer matrix, which is a potential source of vibrationnal luminescence quenching. The ligands used in the present study are fluorinated in order to limit the vibrationnal quenching of the ligand itself, and to increase the volatility of the complexes. In this paper, we report the synthesis, the sublimation process and the characterization of the thin films.

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kik, P.G. and Polman, A., MRS Bulletin 23, 48, (1998)Google Scholar
2. Kuriki, K., Koike, Y. and Okamoto, Y., Chem. Rev. 102, 2347(2002)Google Scholar
3. Slooff, L. H., Polman, A., Oude Wolbers, M. P., van Veggel, F. C. J. M., Reinhoudt, D. N. and Hofstraat, J. W., J. Appl. Phys. 83, 497(1998).Google Scholar
4. Mancino, G., Ferguson, A. J., Beeby, A., Long, N. J., Jones, T. S., J. Am. Chem. Soc., 127, 524(2005)Google Scholar
5. Monguzzi, A., Tubino, R., Meinardi, F., Orbelli Birolli, A., Pizzoti, M., Demartin, F., Quochi, F., Cordella, F. and Loi, M.A., Chem. Mater. 21, 128(2009)Google Scholar
6. Song, L., Hu, J., Wang, J., Liu, X. and Zhen, Z., Photochem. Photobiol. Sci. 7, 689(2008)Google Scholar
7. Le Quang, A. Q., Truong, V. G., Jurdyc, A.-M., Jacquier, B., Zyss, J. and Ledoux, I., J. App. Phys 101, 023110(2007)Google Scholar
8. Jellison, G. E. Jr. and Modine, F. A., Appl. Phys. Lett. 69, 371(1996)Google Scholar