Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T09:05:25.306Z Has data issue: false hasContentIssue false
  • English
  • Français

Use of Electrodialysis to Bentonitics Clays Dispersions

Published online by Cambridge University Press:  11 February 2011

L. V. Amorim ,
C. M. Gomes ,
F. L. H. Silva ,
K. B. França ,
H. L. Lira  and
H. C. Ferreira
L. V. Amorim
Affiliation:
Chemical Engineering Department/Federal University of Campina Grande, Av. Aprígio Veloso, 82 ZIP CODE: 58109–970 Campina Grande, [email protected]
C. M. Gomes
Affiliation:
Chemical Engineering Department/Federal University of Campina Grande, Av. Aprígio Veloso, 82 ZIP CODE: 58109–970 Campina Grande, [email protected]
F. L. H. Silva
Affiliation:
Materials Engineering Department/Federal University of Campina Grande, Av. Aprígio Veloso, 82 ZIP CODE: 58109–970 Campina Grande, [email protected]
K. B. França
Affiliation:
Materials Engineering Department/Federal University of Campina Grande, Av. Aprígio Veloso, 82 ZIP CODE: 58109–970 Campina Grande, [email protected]
H. L. Lira
Affiliation:
Chemical Engineering Department/Federal University of Campina Grande, Av. Aprígio Veloso, 82 ZIP CODE: 58109–970 Campina Grande, [email protected]
H. C. Ferreira
Affiliation:
Chemical Engineering Department/Federal University of Campina Grande, Av. Aprígio Veloso, 82 ZIP CODE: 58109–970 Campina Grande, [email protected]
Get access

Abstract

The aim of this work is to study the uses of electrodialysis to bentonitics clays dispersions from Boa Vista City, PB, to improve the rheological properties. The dispersions were prepared with natural clay in the concentration of 4.86% w/w and submitted to electrodialysis process by using cationic polymeric membranes. Following, the dispersions were treated with Na2CO3. After cure, it was evaluated apparent (AV) and plastic (PV) viscosity and water loss (WL). The tests was setting up according to 22 experimental design, with three measures in the central point, to estimate the best applied voltage and time and the influence on AV, PV and WL. The results showed that variables (voltage and time) have significant influence on the rheological properties. It was observed an increase in PV and decrease in WL, with values that satisfy the specifications for water based drilling fluids.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 752: Symposium AA – Membranes–Preparation, Properties and Applications , 2002 , AA8.18
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Schoeman, J.J. and Thompson, M.A., Water Treatment Membrane Processes, Water Research Commission of South África, McGraw-Hill, 1996. Cap. 12.Google Scholar
2. Amorim, L.V., Otimização da Reologia e da Durabilidade de Fluidos de Perfuração à Base de Água e Argila, Qualify Exam presented to the Doctorate Course in Processes Engineering, November, 2001.Google Scholar
3. Souza Santos, P., Estudo Tecnológico de Argilas Montmoriloníticas do Distrito de Boa Vista, Município de Campina Grande, Paraíba, Thesis submitted to a position in Industrial Chemistry, DEQ, EPUSP, São Paulo, 1968.Google Scholar
4. Petrobras, Argila Ativada para Fluido de Perfuração à Base de Água na Exploração e Produção de Petróleo, Método, N-2605, 1998.Google Scholar
5. Petrobras, Argila Ativada para Fluido de Perfuração à Base de Água na Exploração e Produção de Petróleo, Especificação, N-2604, 1998.Google Scholar
6. Strathmann, H, Electrodialysis and Related Processes, Proceeding of the CEE-Brazil, Workshop on Membrane Separation Processes, May 3–8, 1992.Google Scholar