Hostname: page-component-cd9895bd7-jn8rn Total loading time: 0 Render date: 2024-12-27T02:00:21.997Z Has data issue: false hasContentIssue false
  • English
  • Français

Ultra Optimum Green Concrete Using High Volume Fly Ash Activated Systems

Published online by Cambridge University Press:  11 November 2013

Diego F. Velandia ,
Cyril Lynsdale ,
Fernando Ramirez ,
John L. Provis ,
German Hermida  and
Ana C. Gomez
Diego F. Velandia
Affiliation:
Department of Civil and Structural Engineering, University of Sheffield, Sir Frederick Mappin Building, Mappin Street, Sheffield, S1 3JD, UK Research and Development, Argos, Carrera 62 No. 19 - 04, Bogotá, Colombia
Cyril Lynsdale
Affiliation:
Department of Civil and Structural Engineering, University of Sheffield, Sir Frederick Mappin Building, Mappin Street, Sheffield, S1 3JD, UK
Fernando Ramirez
Affiliation:
Department of Civil and Environmental Engineering, Universidad de los Andes, Carrera 1 este No. 19A-40, Edificio Mario Laserna, Oficina ML 632, Bogotá, Colombia
John L. Provis
Affiliation:
Department of Materials Science and Engineering, University of Sheffield, Sir Robert Hadfield Building, Mappin Street, Sheffield, S1 3JD, UK
German Hermida
Affiliation:
Sika Technical support, km 20,5 Autopista Norte, Tocancipa, Colombia
Ana C. Gomez
Affiliation:
Research and Development, Argos, Carrera 62 No. 19 - 04, Bogotá, Colombia
Get access

Abstract

Environmental issues related to CO2 emissions have become a key focus for many different industries, including the cement and concrete industry. An environmentally optimized ‘green’ concrete can provide a much needed alternative to conventional concrete to reduce the carbon foot-print of the construction industry. This can be achieved through high Portland cement replacement by fly ash and with the inclusion of activators to enhance the rate of development of strength and other properties. This study evaluates different fly ashes and different activators (Na2SO4, lime and quicklime) that are added to enhance the reaction of the fly ash to achieve a comparable performance to that of standard Portland cement in mixes of much lower CO2 emissions. TGA, XRD and SEM are used to determine the development of hydration products and the consumption of portlandite by the fly ash. It is found that the amorphous content of the fly ash is an important parameter influencing compressive strength evolution. Based on the results, Na2SO4 as an activator, and a fly ash with high reactive SiO2 and Al2O3 contents and low Fe2O3 are found to provide the best options for producing a high volume fly ash matrix with the potential to show comparable behavior to a Portland cement control mix.

Keywords

compositeadditivesblend
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1612: Symposium 4B – Concrete and Durability of Concrete Structures , 2013 , imrc2013-s4b-p002
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Pade, C. and Guimaraes, M., Cem. Concr. Res. 37, 1348 (2007).CrossRefGoogle Scholar
Malhotra, V. M, Concr. Int. 24, 30 (2002).Google Scholar
Duran, C., Cem. Concr. Res. 35, 1112 (2005).CrossRefGoogle Scholar
Palomo, A., Grutzeck, M.W. and Blanco, M. T.. Cem. Concr. Res. 29, 1323 (1999).CrossRefGoogle Scholar
Pacheco-Torgal, F., Abdollahnejad, Z., Camoes, A.F., Jamshidi, M., Ding, Y., Const. Building Mat. 30, 400 (2012).CrossRefGoogle Scholar
Shi, C., Fernández-Jimenez, A. and Palomo, A., Cem. Concr. Res. 41, 750 (2011).CrossRefGoogle Scholar
Paya, J., Monzó, J., Borrachero, M. V., Peris-Mora, E., Gonzalez-Lopez, E., Cem. Concr. Res. 27, 1365 (1997).CrossRefGoogle Scholar
Qian, J., Shi, C., Wang, Z., Cem. Concr. Res. 31, 1121 (2001).CrossRefGoogle Scholar
Fernández-Jimenez, A., Palomo, A., Fuel 82, 2259 (2003).CrossRefGoogle Scholar
Criado, M., Palomo, A. and Fernández-Jimenez, A.. Fuel 84, 2048 (2005).CrossRefGoogle Scholar
Poon, C., Kou, S., Lam, L. and Lin, Z.. Cem. Concr. Res. 31, 873 (2001).CrossRefGoogle Scholar
Lee, C.Y, Lee, H.K and Lee, K.M. Cem. Concr. Res. 33, 425 (2003).CrossRefGoogle Scholar
Antiohos, S., Papageorgiou, A., Papadakis, V. and Tsimas, S.. Const. Building Mat. 22, 1191 (2007).CrossRefGoogle Scholar