Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-29T09:58:44.704Z Has data issue: false hasContentIssue false
  • English
  • Français

UHV Interface Studies of Palladium Silicide Formation on Hydrogenated Amorphous Silicon Films

Published online by Cambridge University Press:  28 February 2011

H. E. Rhodes ,
G. Apai ,
L. Rivaud ,
L. S. Hung  and
J. W. Mayer
H. E. Rhodes
Affiliation:
Electronics Research Laboratories, Photographic Products Group, Rochester, New York 14650
G. Apai
Affiliation:
Corporate Research Laboratories, Eastman Kodak Company, Rochester, New York 14650
L. Rivaud
Affiliation:
Electronics Research Laboratories, Photographic Products Group, Rochester, New York 14650
L. S. Hung
Affiliation:
Department of Materials Science and Engineering, Cornell University, Ithaca, NY 14853
J. W. Mayer
Affiliation:
Department of Materials Science and Engineering, Cornell University, Ithaca, NY 14853
Get access

Abstract

Silicide formation by reaction of palladium metal (Pd0) with hydrogenated amorphous silicon (a-Si:H) substrates was studied with Rutherford backscattering spectrometry (RBS), forward recoil spectrometry, x-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Upon low-temperature (200° C) annealing, RBS and TEM show a single-phase Pd2Si. This phase grows with the square root of time, and the activation energy is identical to that of the corresponding metal on single-crystal silicon substrates. The growth is slightly faster for hydrogenated amorphous silicon, which is attributed to its amorphous structure. During silicide formation, the hydrogen is released from silicides and presumably outdiffuses into a vacuum without interfacial accumulation. Thus, barrier formation does not occur, and the presence of hydrogen in the substrates has no effect on silicide growth.

The silicide electronic structure (core level binding energies, lineshapes, and d-band filling) of Pd2 Si on a-Si:H is identical to that of Pd2 Si formed on cr stalline silicon. Binding energy and peak shape analysis show the Pd2Si/Pd0 interface to be composed of one additional phase, Pd4Si, which has a well-defined binding energy (335.8 eV) and a narrow (FWHM = 1.1 eV), symmetric line shape. It has long been postulated that interface phases may be important in determining the phase sequence in silicide growth and the dominant diffusing species. This Pd4 Si interface phase may be important in understanding palladium silicide growth.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 70: Symposium E – Materials Issues in Amorphous-Semiconductor Technology , 1986 , 387
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Apai, G. and Rhodes, H.E. (to be published).Google Scholar
2. Hung, L., Kennedy, E., Palmstrom, C., Olowolafe, J., Mayer, J., and Rhodes, H.E., Appl. Phys. Lett. 47, 236 (1985).CrossRefGoogle Scholar
3. Takagi, Y., Hwang, C.-H., Sekizawa, H., and Kawamura, K., Jpn. J. Appl. Phys. 24, 390 (1985).Google Scholar
4. Riley, J., Ley, L., Azoulay, J., and Terakura, K., Phys. Rev. B 20, 776 (1979).Google Scholar
5. Penn, D., J. Electron. Spectrosc. Relat. Phenom. 9, 29 (1976).Google Scholar
6. Nicolet, M.-A. and Lau, S.S., in VSLI Electronics: Microstructure Science, Vol. 6, edited by Einspruch, N.G. and Larrabee, G.B. (Academic Press, New York, 1983) p. 407.Google Scholar
7. Grunthaner, P.J., Grunthaner, F.J., Madhukar, A., and Mayer, J.W., J. Vac. Sci. Technol. 19, 649 (1981).Google Scholar