Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-29T07:32:51.854Z Has data issue: false hasContentIssue false
  • English
  • Français

Tribological Properties of Ion Implanted Amorphous Fe50Ti50 Films

Published online by Cambridge University Press:  25 February 2011

G.-P. Hirvonen ,
M. Nastasi  and
J. W. Mayer
G.-P. Hirvonen
Affiliation:
Department of Materials Science and Engineering, Cornell University, Ithaca, N.Y., 14853
M. Nastasi
Affiliation:
Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, N.M. 87545
J. W. Mayer
Affiliation:
Department of Materials Science and Engineering, Cornell University, Ithaca, N.Y., 14853
Get access

Abstract

A surface layer of Fe50Ti50 on AISI 304 stainless steel was produced by ion beam mixing a Fe-Ti multilayer structure. Subsequently, the layer was implanted with C, N, or C+N ions. The dry sliding properties of these surfaces were tested using a ceramic pin as a rider in pin-on-disc measurements. Implantations produced significant improvements in the surface friction and wear properties. Samples implanted with C or C+N showed good tribological properties even under conditions where the Herzian peak pressure exceeded the yield strength of the substrate. As a result of different treatments the appearance of the wear tracks examined with a scanning electron microscope was also changed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 93: Symposium C – Materials Modification and Growth Using Ion Beams , 1987 , 335
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Singer, I.L. and Barlak, T.M., Appl. Phys. Lett. 43, 457 (1983).Google Scholar
2. Follstaedt, D.M., Knapp, J.A., Pope, L.E., Yost, F.G. and Picraux, S.T., Appl. Phys. Lett. 45, 529 (1984).Google Scholar
3. Inohue, A., Iwadochi, T.I., Minemura, T. and Matsumoto, T., Trans. Jap. Inst. Met. 22, 197 (1981).Google Scholar
4. Hirvonen, J.-P., Nastasi, M. and Mayer, J.W., J. Appl. Phys. 60, 980 (1986).Google Scholar
5. Hirvonen, J.-P., Nastasi, M. and Mayer, J.W., Appl. Phys. Lett. 49, 1345 (1986).Google Scholar
6. Hirvonen, J.-P., Nastasi, M., Phillips, J.R. and Mayer, J.W., J. Vac. Sci. Technol. A4, 2997(1986).Google Scholar
7. Biersack, J.P. and Ziegler, J.F., in Ion Implantation Techniques edited by Ryssel, H. and Glawischning, H. (Springer Series in Electrophysics 10, Heidelberg, 1982), p. 157.Google Scholar
8. Hirvonen, J.-P., Nastasi, M. and Mayer, J.W., Appl. Phys. Lett. (to be published).Google Scholar
9. Follstaedt, D.M., Knapp, J.A., Pope, L.E. and Picraux, S.T., Nucl. Instr. Meth. B12, 359 (1985).Google Scholar