Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-29T07:32:38.258Z Has data issue: false hasContentIssue false
  • English
  • Français

Thin Film Transistors on Plastic Substrates Using Silicon Deposited by Microwave ECR-CVD

Published online by Cambridge University Press:  15 February 2011

Lihong Teng  and
Wayne A. Anderson
Lihong Teng
Affiliation:
Department of Electrical Engineering, University at Buffalo, The State University of New York, Buffalo, NY 14260.
Wayne A. Anderson
Affiliation:
Department of Electrical Engineering, University at Buffalo, The State University of New York, Buffalo, NY 14260.
Get access

Abstract

The properties of thin film transistors (TFT's) on plastic substrates with active silicon films deposited by microwave ECR-CVD were studied. Two types of plastic were used, PEEK and polyimide. The a-Si:H TFT deposited at 200°C on polyimide substrates showed a saturation field effect mobility of 4.5 cm2/V-s, a threshold voltage of 3.7 V, a subthreshold swing of 0.69 V/dec and an ON/OFF current ratio of 7.9×106, while the TFT fabricated on PEEK at 200°C showed a saturation field effect mobility of 3.9 cm2/V-s, a threshold voltage of 4.1 V, a subthreshold swing of 0.73 V/dec and an ON/OFF current ratio of 4×106. Comparison is made to TFT's with the Si deposited at 400°C on glass.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 769: Symposium H – Flexible Electronics - Materials and Device Technology , 2003 , H2.4
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Smith, P.M., Carey, P.G. and Sigmon, T.W., Appl. Phys. Lett., vol. 70, pp.342–344, 1997.Google Scholar
[2] Sazonov, A. and Nathan, A., J. Vac. Sci. Technol., vol. A18, pp. 780–782, 2000.Google Scholar
[3] Wehrspohn, R. B., Deane, S.C., French, I. D., Gale, I., Hewett, J., Powell, M. J. and Robertson, J., J. Appl. Phys., vol. 87, pp. 144–154, 2000.Google Scholar
[4] Choi, W. C., Kim, E. K., Min, S. K., Park, C. Y., Kim, J. H. and Seong, T. Y., Appl. Phys. Lett., vol. 70, pp. 3014–3016, 1997.Google Scholar
[5] Kitagawa, M., Setsune, K., Manabe, Y. and Hirao, T., Jpn. J. Appl. Phys., vol. 27, pp. 2026–2031, 1988.Google Scholar
[6] Roth, J. R., “Industrial plasma engineering,” vol. 1, pp. 501–510, 1995, Institute of Physics Publishing.Google Scholar
[7] Jagannathan, B. B., Wallace, R. L. and Anderson, W. A., J.Vac. Sci. Technol., vol. A16, pp. 2751–2756, 1998.Google Scholar
[8] Chen, C-Y and Kanicki, J., IEEE Electron Device Lett., vol. 17, pp. 437–439, 1996.Google Scholar
[9] Madan, A., Comber, P. G. Le and Spear, W. E., J. Non-Crystalline Solids, vol. 20, pp. 239–257, 1976.Google Scholar
[10] Walle, C. G. Van de and Tuttle, B. R., IEEE Trans. Electron Devices, vol. 47, pp. 1779–1786, 2000.Google Scholar