Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-29T07:22:33.270Z Has data issue: false hasContentIssue false
  • English
  • Français

Thickness Mode Resonance of PZT Coatings on a Substrate

Published online by Cambridge University Press:  10 February 2011

M. Lukacs ,
T. Olding ,
M. Sayer  and
S. Sherrit
M. Lukacs
Affiliation:
Department of Physics, Queen's University, Kingston Ontario, Canada
T. Olding
Affiliation:
Department of Physics, Queen's University, Kingston Ontario, Canada
M. Sayer
Affiliation:
Department of Physics, Queen's University, Kingston Ontario, Canada
S. Sherrit
Affiliation:
Department of Physics, Royal Military College of Canada, Kingston, Ontario, Canada
Get access

Abstract

The analytical solution of the wave equation for a piezoelectric layer supported by a substrate is presented. Using the appropriate boundary conditions, the impedance for a piezoelectric layer driven in the thickness axis is derived and expressed in terms of the mechanical, electrical and piezoelectrical properties of the two materials. This solution allows for the extension of the free resonator IEEE impedance techniques and provides a nondestructive method for determining the material parameters of a piezoelectric film with mechanical support. The validity and universality of the model is demonstrated by measurements on composite sol gel PZT coatings within the thickness range of 15-70μm on aluminum substrates of varying thickness, and by simulating the mass loading of a quartz thickness resonator.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 493: Symposium U – Ferroelectric Thin Film VI , 1997 , 397
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. IEEE Standard on Piezoelectricity, ANSI/IEEE, Std 176–1987.Google Scholar
2. Dieulesaint, E. and Royer, D., ‘Elastic Waves in Solids Applications to Signal Processing’, John Wiley & Sons, 1980.Google Scholar
3. Sittig, E.K., ‘Design and Technology of Piezoelectric Transducers for Frequencies Above 100MHz’, Physical Acoustics, vol. 9, pp 221–272, 1972.Google Scholar
4. Barrow, D.A., Petroff, T.E>, Tandon, R. and Sayer, M., ‘Characterization of Thick Lead Zirconate Titanate Films Fabricated Using a New Sol Gel Based Process’, Journal of Applied Physics, vol. 81, pp 276, 1997.,+Tandon,+R.+and+Sayer,+M.,+‘Characterization+of+Thick+Lead+Zirconate+Titanate+Films+Fabricated+Using+a+New+Sol+Gel+Based+Process’,+Journal+of+Applied+Physics,+vol.+81,+pp+276,+1997.>Google Scholar
5. Sherrit, S., Wiederek, H.D., Mukherjee, B.K and Sayer, M., ‘An Accurate Circuit Model for the Unloaded Piezoelectric Vibrator’, Journal of Physics D, Vol. 30, pp 2354–2363, 1997.Google Scholar
6. Smits, J.G., ‘Iterative Method for Accurate Determination of the Real and Imaginary Part of the Materials Coefficients of Piezoelectric Ceramics’, in IEEE Trans. Son. Ultrason., vol. SU–23, pp. 393–402, 1976.Google Scholar
7. Sayer, M., Zou, L., Leclerc, B., Olding, T., Lukacs, M. and Schloss, J.H., ‘Process Optimization for Piezoelectric Films and Coatings’ preceding paper in conference.Google Scholar