Article contents
Thermionic FEEM, PEEM and I/V Measurements of N-Doped CVD Diamond Surfaces
Published online by Cambridge University Press: 14 March 2011
Abstract
Imaging of field emission and photoemission from diamond surfaces is accomplished with a high resolution photo-electron emission microscope (PEEM). Measurements obtained as a function of sample temperature up to 1000°C display thermionic field emission images (TFEEM). The system can also record the emission current versus applied voltage. N-doped diamond films have been produced by MPCVD with a N/C gas phase ratio of 48. The surfaces display uniform emission in PEEM at all temperatures. No FEEM images are detectable below 500°C. At ∼680°C the T-FEEM and PEEM images are nearly identical in intensity and uniformity. This is to be contrasted with other carbon based cold cathodes in which the emission is observed from only a low density of highly emitting sites. The I/V measurements obtained from the N-doped films in the T-FEEM configuration show a component that depends linearly on voltage at low fields. At higher fields, an approximately exponential dependence is observed. At low temperatures employed (<700°C), the results indicate a thermionic component to the emitted current.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2000
References
REFERENCES
- 1
- Cited by