Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-25T15:20:44.579Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal Performance of Deep-Burn Fusion-Fission Hybrid Waste in a Repository

Published online by Cambridge University Press:  15 March 2011

James A. Blink ,
Veraun Chipman ,
Joseph Farmer ,
Henry Shaw  and
Pihong Zhao
James A. Blink
Affiliation:
Lawrence Livermore National Laboratory
Veraun Chipman
Affiliation:
Lawrence Livermore National Laboratory
Joseph Farmer
Affiliation:
Lawrence Livermore National Laboratory
Henry Shaw
Affiliation:
Lawrence Livermore National Laboratory
Pihong Zhao
Affiliation:
Lawrence Livermore National Laboratory
Get access

Abstract

The thermal characteristics of the spent fission fuel from a hybrid fusion-fission system (LIFE) capable of extremely high burnups are described. The waste has higher thermal output per unit mass of heavy metal, but lower thermal output per unit energy generated. Plausible designs for interim storage containers and cooling configuration can remove the heat without exceeding fuel temperature limits. Calculations show that a spent LIFE fuel repository would perform within the limits established for the proposed repository at Yucca Mountain.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1125: Symposium R – Materials for Future Fusion and Fission Technologies , 2008 , 1125-R07-33
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Farmer, J. C., LIFE Materials: Overview of Fuels and Structural Materials Issues, Volume 1, LLNL-TR-407386 Rev. 1, LLNL, Livermore, CA, October 25, 2008.Google Scholar
2. Blink, J., Shaw, H. et al., LIFE Materials: Fuel Cycle and Repository, Volume 11, (LLNL report in preparation).Google Scholar
3. , Carslaw and , Jaeger, Conduction of Heat in Solids, Second Edition, Clarendon Press, Oxford, 1959.Google Scholar
4. Bechtel SAIC Company LLC, Ventilation Model and Analysis Report, Yucca Mountain Project Report ANL-EBS-MD-000030, Rev 04, Las Vegas, NV, October 2004.Google Scholar