Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-29T08:00:33.544Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal Expansion Measurements by Photodetector Based Laser Beam Position Change Determination

Published online by Cambridge University Press:  28 February 2011

C. S. Vikram ,
D. K. Agrawal ,
R. Roy  and
H.A. McKinstry
C. S. Vikram
Affiliation:
Also affiliated with the Applied Research Laboratory
D. K. Agrawal
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
R. Roy
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
H.A. McKinstry
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
Get access

Abstract

A new method for thermal expansion measurements is described. The technique is based on rotation of a laser beam reflected from a probe bar caused by uneven thermal expansions of sample and reference rods. At a distance, the reflected gaussian laser beam is observed with a small photodetector (much smaller than the beam cross-section). The measurement of minute beam position change thus results in related low thermal expansion measurement capability. Experimental arrangement and the sensitivity are described. Some results are also reported.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 60: Symposium L – Defect Properties and Processing of High-Technology Nonmetallic Materials , 1985 , 259
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Drotning, W.D., Design of a high precision dilatometer using laser interferometry, SAND-78–1796, Sandia Laboratories, Albuquerque, New Mexico, 1978.Google Scholar
2. Jacobs, S.F., Bradford, J.N. and Berthold, J.W. III, Appl. Optics 9, 2477 (1970).Google Scholar
3. Berthold, J.W. III and Jacobs, S.F., Appl. Optics 10, 2344 (1976).Google Scholar
4. Drotning, W.D., in Thermal Expansion, Vol. 7, edited by Larsen, D.C. (Plenum Press, New York, 1982), p. 55.Google Scholar
5. Plummer, W.A. and Hagy, H.E., Appl. Option 7, 825 (1968).Google Scholar
6. Costa, G.A., Ottonello, P. and Piono, E., Appl. Optics 19, 1032 (1980)CrossRefGoogle Scholar
7. Vikram, C.S. and McKinstry, H.A., Optics and Lasers in Engineering 6, 91 (1985).CrossRefGoogle Scholar
8. Vikram, C.S., Agrawal, D.K., Roy, R. and McKinstry, H.A., Mat. Lett. 3, 482 (1985).Google Scholar
9. Kirby, R.K. and Hahn, T.A., Certificate of Analysis, Standard Reference Material 739, National Bureau of Standards, Washington, DC (May 12, 1971).Google Scholar
10. Data sheet on Zerodur, Scott Optical Glass, Inc., Duryea, Pennsylvania.Google Scholar
11. Tanwar, L.S. and Kunzmann, H., J. Phys. E: Sci. Instrum. 17, 864 (1984).Google Scholar