Hostname: page-component-cd9895bd7-dk4vv Total loading time: 0 Render date: 2024-12-27T02:12:03.387Z Has data issue: false hasContentIssue false
  • English
  • Français

Tailored Microstructures of Niobium-Niobium Silicides by Physical Vapor Deposition

Published online by Cambridge University Press:  21 February 2011

Rabi S. Bhattacharya ,
A. K. Rai ,
M. G. Mendiratta  and
Y. T. Cheng
Rabi S. Bhattacharya
Affiliation:
Universal Energy Systems, Inc., 4401 Dayton-Xenia Road, Dayton, OH 45432
A. K. Rai
Affiliation:
Universal Energy Systems, Inc., 4401 Dayton-Xenia Road, Dayton, OH 45432
M. G. Mendiratta
Affiliation:
Universal Energy Systems, Inc., 4401 Dayton-Xenia Road, Dayton, OH 45432
Y. T. Cheng
Affiliation:
General Motors Research Laboratories, 30500 Mound Road, Warren, MI 48090
Get access

Abstract

The feasibility of fabricating Nb-Nb silicide microstructure by Physical Vapor Deposition with sufficient control of impurities has been investigated. It is demonstrated that electron beam evaporation can satisfy the requirement of impurity control under appropriate vacuum condition. In elemental layered structure of Nb and Si, NbSi2 is the first phase formed upon annealing. It was found that, at 600°C, the growth rate of NbSi2 phase at the interface of Nb and Si is 35Å/min. The Nb5Si3 phase nucleates at a higher temperature (around 900°C) at the interface of Nb and NbSi2. In the case of co-deposited film with overall composition around Nb5 Si3, NbSi2 formation is by-passed. Thus, multilayers of Nb/NbSi2 or Nb/Nb5Si3 can be formed from layered elemental deposition and subsequent heat treatment under controlled conditions by adjusting the starting thicknesses of the films. Alternate elemental and co-deposition and subsequent or in-situ heat treatment can directly form the layered Nb/desired silicide composite. Multilayers of Nb/NbSi2 and Nb/Nb5Si3 with layer thicknesses below 500Å have been formed from layered elemental deposition.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 194: Symposium R – Intermetallic Matrix Composites I , 1990 , 71
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Graves, J. A. and Bampton, C. C., “Direct Consolidation of Titanium Aluminide Composites Using Blended Powder,” Quarterly Technical Progress Reports, Contract No. NAS1–18604, Rockwell International Science Center, Thousand Oaks, CA (1989).Google Scholar
2. Patrick, K., Metcut - Materials Research group, WRDC/MLLS, private communication (1989).Google Scholar
3. Shah, D. M., Musson, C. W., Anton, D. L., and Duhl, D. N., “ntermetallic Composite Feasibility,” Interim Reports under USAF Contract F33615–88-C-5405, United Technologies/Pratt & Whitney Group, West Palm Beach, FL (1988–1989).Google Scholar
4. Herman, H., MRS Bulletin, 13 (12), 60 (1988).Google Scholar
5. Stephens, J. R., “High Temperature Metal Matrix Composites for Future Aerospace Systems,” NASA Technical Memorandum 100212, NASA Lewis Research Center, Cleveland, OH (1987).Google Scholar
6. Amans, J., Bryce, P. and Lawson, R. P. W., J. Vac. Sci. Technol. 13, 591 (1976).Google Scholar
7. Chang, C. S., Nieh, C. W., Chu, J. J. and Chen, L. J., Thin Solid Films 161, 263 (1988).Google Scholar