Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-04T23:33:32.820Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis of Photosensitive Organic-Inorganic Hybrid Polymers via Anhydrous Sol-Gel Process for Integrated Optics

Published online by Cambridge University Press:  15 February 2011

Xinshi Luo ,
Congji Zha  and
Barry Luther-Davies
Xinshi Luo
Affiliation:
Laser Physics Centre, Research School of Physical Sciences and Engineering, Australian National University, Canberra ACT 0200, Australia
Congji Zha
Affiliation:
Laser Physics Centre, Research School of Physical Sciences and Engineering, Australian National University, Canberra ACT 0200, Australia
Barry Luther-Davies
Affiliation:
Laser Physics Centre, Research School of Physical Sciences and Engineering, Australian National University, Canberra ACT 0200, Australia
Get access

Abstract

Photosensitive organic-inorganic hybrid polymers were synthesised for integrated optical and optoelectronic devices by a non-hydrous sol-gel process of hydrolysis/condensation of 3-methacryloxypropyltrimethoxysilane (MPS), diphenyldimethoxysilane (DPhDMS), and zirconium isopropoxide (TPZ) with boric acid under anhydrous conditions. The methacryl groups of MPS are UVpolymerizable, which are suitable for low cost fabrication of waveguides with a “UV write/develop” process. The incorporation of DPhDMS and TPZ was found useful in reducing the optical loss and in enhancing the thermostability of the polymer. The refractive index of the hybrid polymer is tuneable from 1.4950 to 1.5360 by variation of the ratio among MPS, DPhDMS and TPZ. Optical characterisation showed that the material has low optical losses at the telecommunications windows (0.16 dB/cm at 1310 nm and 0.4 dB/cm at 1550nm). The hybrid polymer also showed a low birefringence (1.2×10-4), a large thermo-optic (TO) coefficient (-2.77 ×10-4), and an outstanding linearity of dn/dT in a wide range of temperature (from 25 °C to 200 °C). Waveguides forming ability for the hybrid polymer with UV imprinting was also demonstrated.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 780: Symposium Y – Advanced Optical Processing of Materials , 2003 , Y4.11
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

references

1. Miya, T., IEEE J. of Sel. Top. in Quantum Electron. 6, 38–45 (2000)Google Scholar
2. Kang, J.-W., Kim, E., Kim, J.-J., Optical Mater. 21, 543–548 (2002)Google Scholar
3. Shi, W., Ding, Y. J., Fang, C., Pan, Q., Gu, Q., Optics and Lasers in Eng. 38, 361–371 (2002)Google Scholar
4. Kang, J.-W., Kim, J.-P., Lee, W.-Y., Kim, J.-S., Lee, J.-S., Kim, J.-J., J. Lightwave Technol. 19, 872–875 (2001)Google Scholar
5. Hida, Y., Imamura, S., Jpn. J. Appl. Phys. 34, 6416–6422 (1995)Google Scholar
6. Najafi, S.I., Li, C.-Y., Chisham, J., Andrew, M.P., Coudray, P., Malek-Tabrizi, A., Peyghambarian, N., Proc. SPIE, 2695, 38–41 (1996)Google Scholar
7. Coudray, P., Chisham, J., Malek-Tabrizi, A., Li, C.Y., Andrew, M., Najafi, S.I., Proc. SPIE, 2695, 92–97 (1996)Google Scholar
8. Stuart, B., George, B., McIntyre, P., Modern Infrared Spectroscopy (John Wiley & Sons, New York, 1996) p. 110.Google Scholar