Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T08:57:37.551Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis of Bulk Quasicrystals by Spark Plasma Sintering

Published online by Cambridge University Press:  17 March 2011

E. Fleury ,
J.H. Lee ,
S.H. Kim ,
G.S. Song ,
J.S. Kim ,
W.T. Kim  and
D.H. Kim
E. Fleury
Affiliation:
Yonsei University, Center for Noncrystalline Materials, Department of Metallurgical Engineering, Seoul, Korea
J.H. Lee
Affiliation:
Asan Medical Center, Department of Biomedical Engineering, Seoul, Korea
S.H. Kim
Affiliation:
Yonsei University, Center for Noncrystalline Materials, Department of Metallurgical Engineering, Seoul, Korea
G.S. Song
Affiliation:
Yonsei University, Center for Noncrystalline Materials, Department of Metallurgical Engineering, Seoul, Korea
J.S. Kim
Affiliation:
Ulsan University, Department of Materials Science and Engineering, Ulsan, Korea
W.T. Kim
Affiliation:
Chongju University, Department of Physics, Chongju, Korea
D.H. Kim
Affiliation:
Yonsei University, Center for Noncrystalline Materials, Department of Metallurgical Engineering, Seoul, Korea
Get access

Abstract

Spark plasma sintering method was applied to Al-Cu-Fe and Al-Si-Cu-Fe gas-atomized powders to prepare almost pore-free cylindrical specimens with icosahedral and 1/1 cubic approximant phases, respectively. This investigation has revealed that a high density could be obtained despite the short period and low temperature imposed during spark plasma sintering. In comparison to hot press technique, these conditions are favorable since they limit the formation of secondary phases and avoid exaggerated grain growth. The Vickers microhardness and fracture toughness of these two alloy systems were found to be larger than those obtained from cast and hot pressed samples, which could be attributed to a strong bonding between powder particles and the small-grained microstructure of the bulk SPS quasicrystalline specimens.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 643: Symposium K – Quasicrystals-Preparation, Properties, and Applications , 2000 , K2.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Dubois, J.-M., Thiel, P. A., Tsai, A.-P., Urban, K., in Quasicrystals, Mater. Res. Soc. Symp. Proc., 553, symposium held 30 November-2 December 1998, in Boston, Massachusetts, (Mater. Res. Soc., 1999).Google Scholar
[2] Jouland, J.L., Bernardini, J., Gas, P., Bergman, C., Dubois, J.M., Calvayrac, Y., and Gratias, D., Phil. Mag., 75, 1287 (1997).Google Scholar
[3] Shield, J.E and Kramer, M.J., J. Mater. Res., 12, 2043 (1997).Google Scholar
[4] Tokita, M., J. of Society of Powder Technology Japan, 30, 790 (1993).Google Scholar
[5] Fleury, E., Lee, J.H., Kim, S.H., Kim, K.B., Kim, J.S., Kim, W.T. and Kim, D.H., J. Mater. Res. submitted to publication (2000).Google Scholar
[6] Niihara, K., Morena, R. and Hasselman, D.P.H., J. of Mater. Sci. Lett., 1, 13 (1982).Google Scholar
[7] Fleury, E., Lee, S.M., Kim, W.T. and Kim, D.H., Metals and Materials, 6, 415 (2000).Google Scholar
[8] Lee, S.M., Jung, J.H., Fleury, E., Kim, W.T. and Kim, D.H., Mater. Sci. & Eng. A., 294–296, 99 (2000).Google Scholar
[9] Quivy, A., Quiquandon, M., Calvayrac, Y., Faudot, F., Gratias, D., Berger, C., Brand, R.A., Simonet, V. and Hippert, F., J. Phys.: Condens. Mater., 8, 4223 (1996).Google Scholar
[10] Song, G.S., Kim, K.B., Fleury, E., Kim, W.T., Kim, D.H., J. of Mater. Sci. Lett., submitted to publication (2000).Google Scholar
[11] Wolf, B. and Paufler, P., Surf. and Interface Anal., 27, 592 (1999).Google Scholar