Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-29T06:56:21.291Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis and Electrochemical characterization of LiNi1-yCoyO2 powders obtained by complex sol-gel process

Published online by Cambridge University Press:  10 February 2011

F. Croce ,
A. D'Epifanio ,
A. Deptula ,
W. Lada ,
A. Ciancia ,
A. Di Bartolomeo  and
A. Brignocchi
F. Croce
Affiliation:
University “La Sapienza” Department of Chemistry, P.le A. Moro,5 −00185-Roma Italy
A. D'Epifanio
Affiliation:
University “La Sapienza” Department of Chemistry, P.le A. Moro,5 −00185-Roma Italy
A. Deptula
Affiliation:
Institute of Nuclear Chemistry and Technology, Warsaw, Poland
W. Lada
Affiliation:
Institute of Nuclear Chemistry and Technology, Warsaw, Poland
A. Ciancia
Affiliation:
ENEA, C.R.E. Casaccia, Italy
A. Di Bartolomeo
Affiliation:
ENEA, C.R.E. Casaccia, Italy
A. Brignocchi
Affiliation:
ENEA, C.R.E. Casaccia, Italy
Get access

Abstract

The layered oxides, among the wide family of intercalation compounds, have received considerable attention as positive electrode materials in high-energy density lithium and lithium ion batteries. Within this frame LiNiO2 and LiCoO2 oxides and their solid solutions have been extensively studied as they (and the LiMn2O4 spinels) are the only known materials able to intercalate reversibly lithium at high cell voltage (3.5-4 V). Recently, solid solutions such as LiNi1-xCoxO2 have attracted the attention as alternative cathodes to the state of art LiCoO2 in commercial rechargeable Li-ion batteries. Here we have used the Complex Sol-Gel Process (CSGP) to prepare LiNi1-xCoxO2 (x= 0, 0.25, 0.5, 0.75, 1). Starting sols were prepared from Li+-(1-x)Ni2+-xCo2+ acetate aqueous solution in two different routes. According to route-A aqueous ammonia was added to a starting solution containing 0.2M ascorbic acid (ASC) on 1 M total Me. According to route B the starting acetate solutions were first alkalized by ammonia and then the ascorbic acid was added. Regular sols were concentrated to 1/3 of their initial volume and dried slowly up to 170°C. Thermal transformation of the gels to solids was studied by XRD and IR. The electrochemical properties of the compound LiNi0.75Co0.25O2 prepared by the Route-A were evaluated and reported.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 575: Symposium CC – New Materials for Batteries & Fuel Cells , 1999 , 97
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Scrosati, B., J Electrochem. Soc., 139(1992)2276 Google Scholar
2. Tarascon, J.M., McKinnon, W.R., Coowar, F., Bowmer, T.N., Amatucci, G. and Guyomard, D., J. Electrochem. Soc., 141, p. 421 (1994).Google Scholar
3. Barboux, P., Tarascon, J.M. and Shokooh, F.K., Solid, J. State Chem., 94, p. 185 (1991).Google Scholar
4. Deptula, A., Lada, W. Olczak, T., Croce, F., Ronci, F., Ciancia, A., Giorgi, L., Brignocchi, A. and DiBartolomeo, A. in Materials for Electrochemical Energy Storage and Conversion II- Batteries, Capacitors and Fuel Cells, edited by Ginley, D.S., Doughty, D.H., Takamura, T., Zhang, Z. and Scrosati, B. (Mater. Res. Soc. Proc. 496, Pittsburg PA 1998). p. 237–242.Google Scholar
5. Smith, A.L., Applied Infrared Spectrometry, Fundamentals, Techniques and Analytical Problem-Solving, John Wiley and Sons, New York, 1979, p. 251.Google Scholar
6. Deptula, A., Olczak, T., Lada, W., Goretta, K.C., Bartolomeo, A. Di, Brignocchi, A., J. Mat. Res. 11, p. 1 (1996).Google Scholar
7. Deptula, A., Olczak, T., Lada, W., DiBartolomeo, A., Brignocchi, A., Applied Superconductivity 2, p. 613(1995).Google Scholar