Hostname: page-component-cd9895bd7-gbm5v Total loading time: 0 Render date: 2024-12-27T02:40:16.762Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis and Characterization of Cu-doped ZnO Film in Nanowire like Morphology Using Low Temperature Self-Catalytic Vapor-Liquid-Solid (VLS) Method

Published online by Cambridge University Press:  03 January 2013

Ratheesh R. Thankalekshmi ,
Samwad Dixit ,
In-Tae Bae ,
Daniel VanHart  and
A.C. Rastogi
Ratheesh R. Thankalekshmi
Affiliation:
Electrical and Computer Engineering Department, Binghamton University, State University of New York, Binghamton, NY-13902, U.S.A. Center for Autonomous Solar Power (CASP), Binghamton University, State University of New York, Binghamton, NY-13902, U.S.A.
Samwad Dixit
Affiliation:
Electrical and Computer Engineering Department, Binghamton University, State University of New York, Binghamton, NY-13902, U.S.A. Center for Autonomous Solar Power (CASP), Binghamton University, State University of New York, Binghamton, NY-13902, U.S.A.
In-Tae Bae
Affiliation:
Small Scale Systems Integration and Packaging Center, Binghamton University, State University of New York, Binghamton, NY-13902, U.S.A.
Daniel VanHart
Affiliation:
Center for Autonomous Solar Power (CASP), Binghamton University, State University of New York, Binghamton, NY-13902, U.S.A.
A.C. Rastogi
Affiliation:
Electrical and Computer Engineering Department, Binghamton University, State University of New York, Binghamton, NY-13902, U.S.A. Center for Autonomous Solar Power (CASP), Binghamton University, State University of New York, Binghamton, NY-13902, U.S.A.
Get access

Abstract

Cu-doped ZnO film in nanowire structure is synthesized by a closed space flux sublimation and periodic oxidation method at ∼300°C over Si substrate. Oxidative process controlled selfcatalytic VLS mechanism is proposed for the film growth. X-ray diffraction pattern establishes that Cu-doped ZnO nanowires retain the crystallite structure of the wurtzite ZnO. TEM studies indicate single crystal character of the Cu-doped ZnO nanowires. Optical absorption analysis of Cu-doped ZnO nanowires defines two direct energy band gaps. The low energy band gap at 3.2eV is intrinsic to the Cu-doped ZnO material. The higher energy band gap at 3.5eV is attributed to the nanosize, mediated by strong forward scattering of light from the nanowires. Sharp photoluminescence in Cu-doped ZnO corresponding to near bandgap free exciton emission is observed and a redshift of ∼0.07 eV is consistent with the effect of Cu-doping. The visible emission band in both ZnO and Cu-doped ZnO shows a broad green emission band with Cu-substitution shifting the maximum visible luminescence towards the higher energy side.

Keywords

chemical vapor deposition (CVD) (deposition)nanostructurethin film
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1494: Symposium Z – Oxide Semiconductors and Thin Films , 2013 , pp. 37 - 42
Copyright
Copyright © Materials Research Society 2012 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Ahn, K.S., Deutsch, T., Yan, Y., Jiang, Ch.Sh., Perkins, C.L., Turner, J. and Al-Jassim, M., J. Appl. Phys. 102, 023517 (2007).CrossRefGoogle Scholar
McCluskey, M.D. and Jokela, S.J., J. Appl. Phys. 106, 071101 (2009).CrossRefGoogle Scholar
Thankalekshmi, R. R. and Rastogi, A. C., J. Appl. Phys. 111, 07D104 (2012).CrossRefGoogle Scholar
Comini, E., Ferroni, M., Poli, N., Sberveglieri, G., Kaciulis, S., Mezzi, A. and Pandolfi, L., Proceedings of IEEE Sensors Conference, Lecce, Italy, October pp. 835–838 (2008).Google Scholar
Xu, C., Sun, X.W., Zhang, X.H., Ke, L. and Chua, S.J., Nanotechnology 15, 856 (2004).CrossRefGoogle Scholar
Xu, C., Yang, K., Huang, L. and Wang, H., J. Chem. Phys. 130, 124711 (2009).CrossRefGoogle Scholar
Thankalekshmi, R.R., Dixit, S. and Rastogi, A.C., Adv. Mat. Lett. 4(1), 9 (2013).CrossRefGoogle Scholar
Djaballah, Y., Bennour, L., Bouharkat, F. and Bouzida, A. B., Modelling Simul. Mater. Sci. Eng. 13, 361 (2005).CrossRefGoogle Scholar
Yu, C.H. and Lin, K.L., J. Mater. Res. 20, 1242 (2005).CrossRefGoogle Scholar
Xu, C., Koo, T.W., Kim, B.S., Lee, J.H., Hwang, S.W. and Whang, D., J.Nanosci. Nanotechnol. 11, 1 (2011).Google Scholar
Rastogi, A.C., Desu, S. B., Bhattacharya, P. and Katiyar, R.S., J. Electroceramics 13, 345 (2004).CrossRefGoogle Scholar
Kim, J. B., Byun, D., Ie, S. Y., Park, D. H., Choi, W. K., Choi, J. W. and Angadi, B., Semicond. Sci. Technol. 23, 095004 (2008).CrossRefGoogle Scholar
Garces, N.Y., Wang, L., Bai, L., Giles, N. C., Halliburton, L. E. and Cantwell, G., Appl. Phys. Lett. 81, 622 (2002).CrossRefGoogle Scholar