Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-09T12:36:45.308Z Has data issue: false hasContentIssue false

Surface Modification of Uranium Alloys by Ion Implantation and Ion Mixing - Effects on Corrosion Behavior

Published online by Cambridge University Press:  25 February 2011

A. Ayral
Affiliation:
CEA Valduc, 21120 Is sur Tille, France
D. Crusset
Affiliation:
CEA Valduc, 21120 Is sur Tille, France
G. Raboisson
Affiliation:
CEA Valduc, 21120 Is sur Tille, France
Get access

Abstract

Ion implantation and ion mixing are applied to improve the corrosion behavior of two uranium alloys: UV0.2 and UTi0.75, in three specific media: hydrogen, humid air and salt fog. This experiments shows particularly that high dose nitrogen implantation might be effective for both corrosive environment, hydrogen and humid air. Ion mixing of aluminum coatings on UTi0.75 alloy induces microcracks in these films and reduce their protective characters in salt fog medium.

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Unpublished data, BEDERE, S., Commissariat à l'Energie Atomique.Google Scholar
2.Unpublished data, AYRAL, A. and RABOISSON, G., Commissariat à l'Energie Atomique.Google Scholar
3. PATTERSON, R.G. and MUSKET, R.G., J. Vac. Sci. Technol. A2, 82 (1984).CrossRefGoogle Scholar
4. ROSSI, F., thesis, Lyon (France), 1989.Google Scholar
5. BEDERE, D. and SANS, P., J. Less-common Met. 91, 33 (1983).CrossRefGoogle Scholar
6. BLOCH, J., SIMCA, F., KROUP, M., STERN, A., SHMARIAHU, D. and MINTZ, M.H., J. Less-common Met. 103, 163 (1984)CrossRefGoogle Scholar
7. DION, L., FIOT, M., Fontaine, J.M., Ph. HEMET and Lozes, G., J. Less-common Met. 121, 531 (1986).CrossRefGoogle Scholar
8. Musket, R.G., Robinson-Weis, G. and Patterson, R.G., Mat. Res. Soc. Symp. Proc., vol. 27, 753 (1984).CrossRefGoogle Scholar
9. Musket, R.G., Mat. Res. Soc. Symp. Proc., vol. 93, 49 (1987).CrossRefGoogle Scholar
10. Williams, J.M., Presentation at the “16th International Conference on Metallurgical Coatings”, April 17–21, 1989, San Diego (USA).Google Scholar