Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-27T02:11:05.377Z Has data issue: false hasContentIssue false
  • English
  • Français

Superelastic Thin Film NiTi-Polymer Composites and Sputtered Thin-walled Tubes

Published online by Cambridge University Press:  01 February 2011

Holger Rumpf ,
Christiane Zamponi ,
Christoph Bourauel ,
Dieter Drescher  and
Eckhard Quandt
Holger Rumpf
Affiliation:
Center of Advanced European studies and Research, Bonn, Germany
Christiane Zamponi
Affiliation:
Center of Advanced European studies and Research, Bonn, Germany
Christoph Bourauel
Affiliation:
Polyclinic for Orthodontics, University of Bonn, 53117 Bonn, Germany
Dieter Drescher
Affiliation:
Polyclinic for Orthodontics, University of Düsseldorf, 40225 Düsseldorf, Germany
Eckhard Quandt
Affiliation:
Center of Advanced European studies and Research, Bonn, Germany
Get access

Abstract

Superelastic shape memory materials are of special interest in medical applications due to the large obtainable strains, the constant stress level and their biocompatibility. Superelastic NiTi-polymer-composites have the potential to be used for novel applications in orthodontics and medical instrumentation as well as in certain areas of mechanical engineering. Especially, using NiTi thin films these composites have the potential to substantially reduce those forces compared to conventional NiTi wires and tubes. In orthodontic applications lowering the forces during archwire treatment is of special importance due to tooth root resorption, which can be caused by the application of oversized forces. Furthermore, the use of superelastic materials or composites enables the application of constant forces independent of diminutive tooth movements during the therapy due to the superelastic plateau. Superelastic NiTi thin films have been fabricated by magnetron sputtering using extremely pure cast melted targets. Special heat treatments were performed for the adjustment of the superelastic properties and the transformation temperatures. A superelastic strain exceeding 4% at 36°C was obtained. In this paper the fabrication of superelastic NiTi thin walled tubes by magnetron sputtering is presented and their mechanical properties are compared to conventional wires and tubes in view of orthodontic applications.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 855: Symposium W – Mechanically Active Materials , 2004 , W1.5
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Duerig, T.W., Tolomeo, D.E., in SMST-2000: Proceedings of the International Conference on Shape Memory and Superelastic Technologies, eds. Scott, S. M., Pelton, A.R., 585 (Pacific Grove, USA, 2001).Google Scholar
2. Ryhänen, J., in SMST-2000: Proceedings of the International Conference on Shape Memory and Superelastic Technologies, eds. Scott, S. M., Pelton, A.R., 251 (Pacific Grove, USA, 2001).Google Scholar
3. Duerig, T.W., Pelton, A.R., Stöckel, D., Mater. Sci. Eng. A 273–275, 149 (1999).Google Scholar
4. Pelton, A.R., Duerig, T.W., Stöckel, D., Min. Invas. Ther. & Allied Technol. 13, 218 (2004).Google Scholar
5. Gupta, V., Martynov, V., Johnson, A.D., Actuator 2002, 355 (2002).Google Scholar
6. Ishida, A., Takei, A., Sato, M., Miyazaki, S., Thin Solid Films 281–282, 337 (1996).Google Scholar
7. Rumpf, H., Boese, M., Winzek, B., Quandt, E., in SMST–2003: Proceedings of the International Conference on Shape Memory and Superelastic Technologies, eds. Scott, S. M., Pelton, A.R., 693 (Pacific Grove, USA, 2004), p. 693–700.Google Scholar
8. Rumpf, H., Winzek, B., Zamponi, Ch., Siegert, W., Neuking, K., Quandt, E., Mater. Sci. Eng. A 378, 429 (2003).Google Scholar
9. Zamponi, C., Rumpf, H., Wehner, B., Frenzel, J., Quandt, E., MuW 35, 359 (2004).Google Scholar
10. Plietsch, R., Bourauel, C., Drescher, D., Nellen, B., J. Mat. Sci. 28, 5892 (1994).Google Scholar
11. Botkin, B., Bourauel, C., Kruzik, M., Pykhteev, O., Rumpf, H., Comput. Method. Appl. M. (2004), submitted for publication.Google Scholar