Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-27T14:13:38.144Z Has data issue: false hasContentIssue false
  • English
  • Français

Study on the local damage mechanisms in WC-Co hard metals during scratch testing

Published online by Cambridge University Press:  01 February 2011

Siphilisiwe Ndlovu ,
Karsten Durst ,
Heinz Werner Hoeppel  and
Mathias Goeken
Siphilisiwe Ndlovu
Affiliation:
[email protected], University of Erlangen-Nuernberg, Department of Materials Science and Engineering, Erlangen, 91058, Germany
Karsten Durst
Affiliation:
[email protected], University of Erlangen-Nuernberg, Department of Materials Science and Engineering, Erlangen, 91058, Germany
Heinz Werner Hoeppel
Affiliation:
[email protected], University of Erlangen-Nuernberg, Department of Materials Science and Engineering, Erlangen, 91058, Germany
Mathias Goeken
Affiliation:
[email protected], University of Erlangen-Nuernberg, Department of Materials Science and Engineering, Erlangen, 91058, Germany
Get access

Abstract

The effect of the cobalt content and WC grain size on the deformation behaviour of WC-Co hard metals was investigated by studying materials with a varying WC grain size and cobalt content. The WC grain size ranged from 2.65 to 0.25 µm and the binder content ranged from 6 to 15 wt%. Single and multiple scratch tests were conducted using a Nano indenter with a Berkovich diamond tip and the load ranged from 5 to 500 mN with a tip sliding velocity of 10 µm/s. Several damage mechanisms were observed and these show a combination of ductile and brittle wear. The bulk properties i.e. composite properties of the hard metal determine the wear in the 6 wt% Co samples on the other hand the 15 wt% Co samples exhibited a localised response to the wear i.e. the wear is determined by the individual phases in the hard metal.

Keywords

microstructuregrain sizetribology
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1049: Symposium AA – Fundamentals of Nanoindentation and Nanotribology IV , 2007 , 1049-AA05-16
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Jia, K., Fischer, T.E., Sliding wear of conventional and nanostructured cemented carbides, Wear 203/204, 310–318 (1997)Google Scholar
2 Durst, K., Göken, M., Micromechanical characterisation of the influence of Rhenium on the mechanical properties in nickel-base superalloys, Materials Science and Engineering A 387–389, 312–316 (2004)Google Scholar
3 Youn, S. W., Kang, C. G., Effect of nanoscratch conditions on both deformation behaviour and wet-etching characteristics of silicon (100) surface, Wear 261, 328–337 (2006)Google Scholar
4 Mulliah, D., Christopher, D., Kenny, S. D., Smith, Roger, Nanoscratching of silver (100) with a diamond tip, Nuclear Instruments and Methods in Physics Research B202, 294–299 (2003)Google Scholar
5 Ndlovu, S., Durst, K., Göken, M., Investigation of the wear properties of WC-Co hard metals using nanoscratch testing, Wear 263, 1602–1609 (2007)Google Scholar
6 Anand, K. and Conrad, H., Microstructue and scaling effects in the damage of WC-Co alloys by sinfle impacts of hard particles, Journal of Materials Science 23, 2931–2942 (1988)Google Scholar