Hostname: page-component-cd9895bd7-dk4vv Total loading time: 0 Render date: 2024-12-27T01:45:47.788Z Has data issue: false hasContentIssue false

Study of Bandgap Profiling Control on Photovoltaic Performance in the Three Stacked Amorphous Solar Cells

Published online by Cambridge University Press:  25 February 2011

Y. Nakata
Affiliation:
Energy Conversion Laboratories SHARP CORPORATION 282–1 Shinjo-cho, Kitakatsuragi-gun, Nara 639–21, Japan
H. Sannomiya
Affiliation:
Energy Conversion Laboratories SHARP CORPORATION 282–1 Shinjo-cho, Kitakatsuragi-gun, Nara 639–21, Japan
S. Moriuchi
Affiliation:
Energy Conversion Laboratories SHARP CORPORATION 282–1 Shinjo-cho, Kitakatsuragi-gun, Nara 639–21, Japan
A. Yokota
Affiliation:
Energy Conversion Laboratories SHARP CORPORATION 282–1 Shinjo-cho, Kitakatsuragi-gun, Nara 639–21, Japan
Y. Inoue
Affiliation:
Energy Conversion Laboratories SHARP CORPORATION 282–1 Shinjo-cho, Kitakatsuragi-gun, Nara 639–21, Japan
M Itoh
Affiliation:
Energy Conversion Laboratories SHARP CORPORATION 282–1 Shinjo-cho, Kitakatsuragi-gun, Nara 639–21, Japan
H Itoh
Affiliation:
Energy Conversion Laboratories SHARP CORPORATION 282–1 Shinjo-cho, Kitakatsuragi-gun, Nara 639–21, Japan
Get access

Abstract

A series of systematic experiments has been made on a bandgap profiling control using a-SiGe and a-SiC cells to clarify the cause for the improvement of the photovoltaic performance by the bandgap profiling in the photovoltaic active layer. It has been shown from the analysis that the most important contribution to the cell performance is an optimization of the ambipolar carrier collection by the bandgap profiling. On the basis of the results, an efficiency of 10.1% was obtained at the promising a-SiC/a-Si/ a-SiGe multi-bandgap stacked cell by the bandgap profiling.

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Nomoto, K., Takeda, Y., Moriuchi, S., Sannomia, H., Okuno, T., Yokota, A., Kaneiwa, M., Itoh, M., Yamamoto, Y., Nakata, Y., Inoguchi, T., Proc. 4th. PVSEC Sydney 85 (1989).Google Scholar
2 Moriuchi, S., Inoue, Y., Sannomiya, H., Yokota, A., Itoh, M., Nakata, Y., Itoh, H., Proc 21th. IEEE Photovol. Spec. Conf. Florida (1990) (unpublished)Google Scholar
3 Guha, S., Yang, J., Pawlikiewiez, A., Glatfelter, T., Ross, R. and Ovshinsky, S.R., Proc. 20th IEEE Photovol. Spec. Conf. Las Vegas 79 (1988).Google Scholar
4 Pawlikiewiez, A.H. and Guha, S., Proc. 20th. IEEE Photovol. Spec. Conf. Las Vegas 251 (1988).Google Scholar
5 Yang, J., Ross, R., Glatfelter, T., Mohr, R., Guha, S., Proc. 4th PVSEC Sydney 409 (1989)Google Scholar
6 Matsuda, A., Koyama, M., Ikeuchi, N., Imanishi, Y. and Tanaka, K., Japan.J.Appl.Phys 25, L54 (1986)Google Scholar
7 Hack, M. and Shur, M., J.Appl.Phys. 58 (2) (1985)Google Scholar