Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-29T07:54:27.323Z Has data issue: false hasContentIssue false
  • English
  • Français

Studies of Zinc, Cadmium and Mercury Stabilization in OPC/PFA Mixtures

Published online by Cambridge University Press:  25 February 2011

C. S. Poon  and
R. Perry
C. S. Poon
Affiliation:
Department of Metallurgy and Science of Materials, Oxford University, Parks Road, Oxford OX1 3PH, U.K.
R. Perry
Affiliation:
Department of Civil Engineering, Imperial College, London, U.K.
Get access

Abstract

The utilization of pulverized fuel ash (PFA) (fly ash) for the stabilization of heavy metal waste is described. Solutions of the group IIB elements (zinc, cadmium and mercury) are used as model materials because of their significance as industrial wastes. The study included aqueous chemistry determinations, a leaching test, the use of SEM to examine microstructure, and compressive strength measurements. The use of PFA in a cementitious matrix lowers the alkalinity of the overall system and thus improves the immobilization of the amphoteric metal such as zinc. The interaction between mercuric solution and PFA plays an important role in improving the retention of the blended system for mercury. SEM results show that the microstructure of the ordinary Portland cement (OPC)/PFA blended system is significantly modified by the incorporation of the waste material. The advantages of using the blended system over a pure OPC system are described in physical and chemical terms.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 86: Symposium N – Fly Ash and Coal Conversion By-Products III , 1986 , 67
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Jantzen, C.J., Stone, J.A., and Ewing, R.C. (ed.), Scientific Basis for Nuclear Waste Management VIII., Mat. Res. Soc. Symp. Proc. Vol.44, (Materials Research Society, Pittsburgh, 1985).Google Scholar
2. I.U. Conversion System Inc., Environ. Sci. & Technol., 11, 436–437 (1977).Google Scholar
3. Chappell, C.L., British Patent No. 1485625 (1 June 1973).Google Scholar
4. Poon, C.S., Peters, C.J., Perry, R., Barnes, P. and Barker, A.P., Sci. Total Environ., 41, 55–71 (1985).Google Scholar
5. Poon, C.S., Clarke, A.I. and Perry, R., Public Health Engineer, 13, 108–111 (1985).Google Scholar
6. Poon, C.S., Clarke, A.I., Perry, R., Barnes, P., and Barker, A.P., Cem. and Concr. Res., 16, 161–172 (1986).Google Scholar
7. Poon, C.S., Clarke, A.I. and Perry, R., Environ. Technol. Letters, 7, 461 (1986).Google Scholar