Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-09T22:18:26.903Z Has data issue: false hasContentIssue false

Studies of the Growth and Local Atomic Bonding of a-CxNyHz Films

Published online by Cambridge University Press:  10 February 2011

H. Efstathiadis
Affiliation:
Center for Advanced Thin Film Technology, University at Albany - SUNY.
Z. Akkerman
Affiliation:
CVC Corp., Fremont, CA.
F. W. Smith
Affiliation:
Department of Physics, City College of the City University of New York.
Get access

Abstract

A systematic study of the growth and local atomic bonding (LAB) of a series of a-CxNyHz alloy films prepared via plasma enhanced chemical vapor deposition (PECVD) from mixtures of NH3/C2H2 and N2/C2H2 is presented. The effects of the reactants and their ratio on the film composition and bonding of hydrogen, the optical constants, and the optical energy gap have been determined. It is found that the presence of nitrogen and hydrogen in the plasma decreases the net film deposition rate due to enhanced etching and that incorporation of nitrogen into the film is limited to N/C ≈0.1. For the films deposited from N2/C2H2 as the concentration of N in the film increases, the concentration of C also increases while that of H decreases. No evidence for the type of bonding expected in the theoretically-predicted C3N4 compound has been found. It is observed that hydrogen is preferentially bonded to nitrogen and there is evidence for N-H…N hydrogen bonding in the films. The predictions of the free energy model (FEM) previously developed for the bonding in a-CxNyHz alloys are compared with these experimental results. The importance of entropy in determining the most stable state of these alloys is demonstrated. The FEM successfully predicts and explains some of the experimentally-observed properties of the alloys.

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Li, D., Chung, Y. and Sproul, W., J. Appl. Phys. 74, 219 (1993).Google Scholar
2. Yu, K., Cohen, M., Haller, E., Hanser, W., Liu, A. and Wu, I., Phys. Rev. B 49, 5034 (1994)Google Scholar
3. Sjostrom, H., Stafstrom, S., Boman, M., and Sundgren, J., Phys. Rev. Lett. 75, 1336 (1995).Google Scholar
4. Sharma, A., Ayyub, P., Lultani, M., Adhi, K., Ogale, S., Appl. Phys. Lett. 69, 23 (1996).Google Scholar
5. Zhang, Y., Zhou, Z., and Li, H., Appl. Phys. Lett. 68, 634 (1996).Google Scholar
6. Seth, J., Padiyath, R., and Babu, S., Diam. Relat. Mater. 3, 210 (1994).Google Scholar
7. Yin, Z. and Smith, F. W., Phys. Rev. B 43, 4507 (1991).Google Scholar
8. Yin, Z. and Smith, F. W., J. Vac. Sci. Technol. A 9, 972 (1991).Google Scholar
9. Efstathiadis, H., Akkerman, Z., and Smith, F. W., Mat. Res. Soc. Symp. Proc. 415, 51 (1996).Google Scholar
10. Efstathiadis, H., Akkerman, Z., and Smith, F. W., Mat. Res. Soc. Symp. Proc. 446, 397 (1997).Google Scholar
11. Maeda, U.M. and Nakamura, H., J. Appl. Phys. 58, 484(1985).Google Scholar
12. Zhang, Z. J., Fan, S., and Lieber, C. M., Appl. Phys. Lett. 66, 26 (1995).Google Scholar
13. Silva, S., Robertson, J., Amaratunga, G., Rafferty, B., Brown, L., Schwan, J., Franceschini, D., and Mariotto, G., J. Appl. Phys. 81, 2626 (1997).Google Scholar