Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-29T08:59:23.755Z Has data issue: false hasContentIssue false
  • English
  • Français

Structural Transformations During the Mechanical Alloying of Nickel and Ruthenium Elemental Powders

Published online by Cambridge University Press:  26 February 2011

A. Van Neste ,
S. Kaliaguine ,
M. Trudeau  and
R. Schulz
A. Van Neste
Affiliation:
Département de Mines et Métallurgie, Département de Génie Chimique, Université Laval, Québec, (Québec) Canada, GIK 7P4
S. Kaliaguine
Affiliation:
Département de Mines et Métallurgie, Département de Génie Chimique, Université Laval, Québec, (Québec) Canada, GIK 7P4
M. Trudeau
Affiliation:
Technologie des Matériaux, Institut de Recherche d'Hydro-Québec, Varennes (Québec), Canada J3X ISI
R. Schulz
Affiliation:
Technologie des Matériaux, Institut de Recherche d'Hydro-Québec, Varennes (Québec), Canada J3X ISI
Get access

Abstract

The structural evolution of a mixture of elemental Ni and Ru powders during high energy ball milling has been studied as a function of milling time using X-ray diffraction and transmission electron microscopy. On the Ni-rich side of the phase diagram (Ni70Ru30) we observe, during the milling, the diffusion of Ru in the Ni and an expansion of the Ni fcc lattice. After about 20 hours of milling, all the Ru has diffused into the Ni and we are left with an oversaturated Ni(Ru) fcc structure with a lattice parameter about 3.6% larger than the one of pure Ni. The Ni does not seem to diffuse into Ru during the process. On the Ru-rich side (Ni43Ru57) we observe initially the same diffusion process taking place but more rapidly. After about 8 hours of milling, the incorporation of Ru in the Ni has driven the fcc Ni lattice to its limit of stability (about 3.9% expansion) and the fcc structure transforms, upon further milling, into a new hcp structure. In the later stage of the process the remaining Ru diffuses into this new phase.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 205: Symposium F – Kinetics of Phase Transformations , 1990 , 227
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Balandin, A.A., Vasyunina, N.A., Chepigo, S.V. and Barysheva, G.S., Dokl. Akad. Nauk. SSSR, 128 (1959) 941 Google Scholar
[2] Vasyunina, N.A., Barysheva, G.S. and Balandin, A.A., Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, 4 (1969) 848 Google Scholar
[3] For a review see: Weeber, A.W. and Bakker, H., Physica B, 153 (1988) 93 CrossRefGoogle Scholar
[4] Hellstern, E., Fecht, H.J., Fu, Z., and Johnson, W.L., J. Appl. Phys., 65 (1989) 305 CrossRefGoogle Scholar
[5] Huot, J.Y., Trudeau, H.L. and Schulz, R., J. of Electrochem Soc. (in print)Google Scholar
[6] Metallurgia, U. Köster; Odlewnictwo Tom 6 Zeszyt-1 1980, pp. 53–60 Google Scholar
[7] Swann, P.R. in “Electron Microscopy and Strength of Crystals” Thomas, G. and Washburn, J. editors. Interscience Publishers 1963.Google Scholar
[8] Massalski, T.B. in Physical Metallurgy Cahn, R.W. and Haasen, P. North Holland Publishing (1983) p. 178 Google Scholar