Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-29T07:49:53.443Z Has data issue: false hasContentIssue false
  • English
  • Français

Structural and Electrical Properties of Tin and Carbon Co-Implanted Silicon

Published online by Cambridge University Press:  26 February 2011

P. Mei ,
M. T. Schmidt ,
P. W. Li ,
E. S. Yang  and
B. J. Wilkens
P. Mei
Affiliation:
Microelectronics Science Laboratories, Columbia University, New York, NY 10027
M. T. Schmidt
Affiliation:
Microelectronics Science Laboratories, Columbia University, New York, NY 10027
P. W. Li
Affiliation:
Microelectronics Science Laboratories, Columbia University, New York, NY 10027
E. S. Yang
Affiliation:
Microelectronics Science Laboratories, Columbia University, New York, NY 10027
B. J. Wilkens
Affiliation:
Bellcore, Red Bank, NJ 07701–7040
Get access

Abstract

The alloy system Six(SnyC1-y)1-x was investigated. In this work, samples were prepared by co-implantation of tin and carbon ions into silicon wafers with dosage range 1015 − 1016cm−2, followed by rapid thermal annealing. Rutherford backscattering channeling, Auger sputter profiling, and secondary ion mass spectrometry were employed to study the crystallinity, chemical composition and depth profiles. A near perfect crystallinity for 0.5% at. of tin and carbon was achieved. To study the electrical properties in the implanted materials, diode I-V measurements were performed. The data show near ideal p-n junctions in the co-implanted region. This work demonstrates promising features of group IV semiconductor synthesis by ion implantation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 201: Symposium A – Surface Chemistry and Beam-Solid Interactions , 1990 , 235
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Patton, G. L., Comfort, J. H., Meyerson, B. S., Crabbe, E. F., Scilla, G. J., de Fresort, E., Stork, J. M., Sun, J. Y. -C., Harame, D. L., and Burghartz, J., IEEE Electron Device Lett., 11, 171, 1990.Google Scholar
[2] Canham, L. T., Dyball, M. R., and Barraclough, K. G., Materials Sciences and Engineering, B4, 95, 1989.Google Scholar
[3] Mpawenayo, P., Mat. Res. Soc. Symp. Proc, 97, 307 (Materials Research Society, Pittsburgh, PA, 1987).Google Scholar
[4] Demichelis, F., Kaniadakis, G., Tagliaferro, A., and Trecso, E., Phys. Rev. B, 37, 1231, 1988.Google Scholar
[5] Harrison, H. B., Iyer, S. S., Sai-Halasz, G. A., and Cohen, S. A., Appl. Phys. Lett., 51, 992, 1987.Google Scholar
[6] Ziegler, J. F., Biersack, J. P., and Littmark, U., The Stopping and Range of Ions in Solids (Pergamon, New York, 1985).Google Scholar
[7] Vergnat, M., Piecuch, M., Marchal, G., and Gerl, M., M. Philos Mag B, 51, 327, 1985.Google Scholar
[8] Williams, J. S. and Short, K. T., ”Metastable Materials Formation by Ion Implantation”, Mat. Res. Soc. Symp. Proc, 7, 109 (Materials Research Society, Pittsburgh, PA, 1981).Google Scholar
[9] Howes, M. J. and Morgan, D. V., Gallium Arsennide; Materials, Devices, and Circuits, ppl67 (John Wiley & Sons, New York, 1985)Google Scholar