Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-25T18:40:54.200Z Has data issue: false hasContentIssue false
  • English
  • Français

Stable Pt/Ge/Au Ohmic Contact to N-GaAs with a Ta-Si-N Barrier

Published online by Cambridge University Press:  22 February 2011

J. S. Chen ,
E. Kolawa ,
R. P. Ruiz  and
M-A. Nicolet
J. S. Chen
Affiliation:
California Institute of Technology, Pasadena, CA 91125
E. Kolawa
Affiliation:
California Institute of Technology, Pasadena, CA 91125
R. P. Ruiz
Affiliation:
Jet Propulsion Laboratory, Pasadena, CA 91109
M-A. Nicolet
Affiliation:
California Institute of Technology, Pasadena, CA 91125
Get access

Abstract

A Pt/Ge/Au contact of the structure: <n-GaAs>/Pt(17nm)/Ge(25nm)/Au(43nm), overlaid with a Ta-Si-N barrier layer and a Au metallization layer has a contact resistivity, ρc, of 3.7×10−6 Ωcm2 after annealing at 450°C for 15 min. After aging at 450°C for 60 h, ρc slightly degrades to 5.5×10−6 Ωcm2 while the surface keeps smooth. When alloyed at 550°C for 15 min, ρc is 1.8×10−6 Ωcm2 and stays about the same value after annealing at 550°C for 1 h. Without the Ta-Si-N barrier and the Au overlayer, the Pt/Ge/Au contact alone is also ohmic after annealing at 450°C for 15 min but with a ρc of ∼10−5 Ωcm2 while the surface morphology deteriorates significantly after aging at 450°C for 20 h.

The thermal reactions of this Pt/Ge/Au contact on GaAs, with or without a Ta-Si-N barrier layer, are investigated by backscattering spectrometry, x-ray diffraction, and transmission electron microscopy in conjunction with energy dispersive analyses of x-rays. For all samples, the main reaction products after annealing at 450°C for 15 min are Au7Ga2, and PtGe:As, a PtGe phase that also contains arsenic. The product phases are randomly distributed within a laterally uniform reacted layer when the Pt/Ge/Au contact is covered by a Ta-Si-N layer. Without the Ta-Si-N barrier layer, a small arsenic loss and a Ga-rich phase (probably Gaoxides) on the contact surface are observed after annealing at 450°C. In this case, the surface and contact-semiconductor interface are more faceted than with a Ta-Si-N barrier layer.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 300: Symposium D1 – III-V Electronic and Photonic Device Fabrication and Performance , 1993 , 255
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Braslau, N., Gunn, J. B., and Staples, J. L., Solid-State Electron. 10, 381 (1967).Google Scholar
2. Robinson, G. Y., Solid-State Electron. 18, 331 (1975).Google Scholar
3. Braslau, N., J. Vac. Sci. Technol. 19, 803 (1981).Google Scholar
4. Kuan, T. S., Batson, P. E., Jackson, T. N., Rupprecht, H., and Wilkie, E. L., J. Appl. Phys. 54, 6952 (1983).Google Scholar
5. Shin, Y-C., Murakami, M., Wilkie, E. L., and Callegari, A. C., J. Appl. Phys. 62, 582 (1987).Google Scholar
6. Murakami, M., Mat. Sci. Reports 5, 273 (1990).Google Scholar
7. Shen, T. C., Gao, G. B., and Morkoc, H., J. Vac. Sci. Technol. B 10, 2113 (1992).Google Scholar
8. Yoshiie, T., Bauer, C. L. and Milnes, A. G., Thin Solid Films 111, 149 (1984).Google Scholar
9. Tandon, J. L., Douglas, K. D., Vendura, G., Kolawa, E., So, F. C. T., and Nicolet, M-A., in Proc. Workshop on Tungsten and Other Refractory Metals for VLSI Application, edited by Blewer, R. S. (Materials Research Society, Pittsburgh, PA, 1986), p. 331,.Google Scholar
10. Molarius, J. M., Kolawa, E., Morishita, K., Nicolet, M-A., Tandon, J. L., Leavitt, J. A., and McIntyre, L. C. Jr., J. Electrochem. Soc. 138, 834 (1991).Google Scholar
11. Merkel, U., Nebauer, E., and Mai, M., Thin Solid Films 217, 108 (1992).Google Scholar
12. Kolawa, E., Molarious, J. M., Nieh, C. W., and Nicolet, M-A., J. Vac. Sci. Technol. A 8, 3006 (1990).Google Scholar
13. Johnson, B. P. and Huang, C. I., J. Electrochem. Soc. 125, 473 (1978).Google Scholar
14. Berger, H. H., Solid-State Electron. 15, 145 (1972).Google Scholar
15. Chen, J. S., Kolawa, E., and Nicolet, M-A., unpublished work.Google Scholar
16. Sinha, A. K. and Poate, J. M., Appl. Phys. Lett. 23, 666 (1973).Google Scholar
17. Chen, J. S., Kolawa, E., Ruiz, R. P. and Nicolet, M-A., in Heteroiunction of Dissimilar Materials, edited by Farrow, R. F. C., Harbison, J. P., Peercy, P. S., and ZangwilU, A., (Mat. Res. Soc. Symp. Proc. 221, Pittsburgh, PA, 1991), p. 355.Google Scholar