Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-27T04:02:10.770Z Has data issue: false hasContentIssue false
  • English
  • Français

Spark Plasma Sintering of Yttria-Stabilized Zirconia/Titanium Nitride Composites

Published online by Cambridge University Press:  16 February 2015

Paulo S. M. Silva  and
Fabio C. Fonseca
Paulo S. M. Silva
Affiliation:
Nuclear and Energy Research Institute – IPEN, São Paulo, SP, 05508-000, Brazil.
Fabio C. Fonseca
Affiliation:
Nuclear and Energy Research Institute – IPEN, São Paulo, SP, 05508-000, Brazil.
Get access

Abstract

Composites of 8 mol% yttria-stabilized zirconia (YSZ) and titanium nitride (TiN) were obtained by mechanical mixing of commercial powders. High-density samples of (1-x) YSZ / x TiN, with x = 0, 25, 50, and 75 wt.%, were obtained by spark plasma sintering (SPS) at 1450 °C for 5 min. Surface contamination with carbon from the SPS was eliminated by diamond sawing of parallel surfaces. X-rays diffraction analyses showed that samples are composed by a mixture of the initial phases, without appreciable reaction as inferred from calculated lattice parameters. dc 4-probe electrical measurements in the 100-850°C under showed that samples have a metallic behavior, indicating that the percolation threshold was attained for the sample with the lowest content of the TiN (x=25 wt.%), which corresponds to ∼27 vol.%.

Keywords

compositesinteringelectrical properties
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1735: Symposium S/W/CC – Advanced Materials for Photovoltaic, Fuel Cell and Electrolyzer, and Thermoelectric Energy Conversion , 2015 , mrsf14-1735-s10-01
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Kozak, J., Rajurkar, K. P. and Chandarana, N., J. Mat. Proc. Tech. 146, 266 (2004)CrossRefGoogle Scholar
Vleugels, J. and Van der Biest, O., J. Am. Ceram. Soc. 82, 2717 (1999).CrossRefGoogle Scholar
Li, J. G., Gao, L. and Guo, J. K., J. Eur. Ceram. Soc. 23, 69 (2003).CrossRefGoogle Scholar
Salehi, S., Van der Biest, O. and Vleugels, J., J. European Ceramic Soc. 26, 3173 (2006).CrossRefGoogle Scholar
Salehi, S., Van der Biest, O. and Vleugels, J., Materials Science Forum 554, 135 (2007).CrossRefGoogle Scholar
Ran, S. and Gao, L., Ceramics International 38, 4923 (2012).CrossRefGoogle Scholar
Torabi, A., Etsell, T. H., Semagina, N. and Sarkar, P., Electrochimica Acta 67, 172 (2012).CrossRefGoogle Scholar
Garay, J. E., Annual Review of Materials Reserch 40, 445 (2010).CrossRefGoogle Scholar