Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-09T20:44:55.282Z Has data issue: false hasContentIssue false
  • English
  • Français

Some Physical, Chemical and Mineralogical Properties of Some Canadian Fly Ashes

Published online by Cambridge University Press:  25 February 2011

R. C. Joshi  and
B. K. Marsh
R. C. Joshi
Affiliation:
Department of Civil Engineering, University of Calgary, Calgary, Alberta, Canada
B. K. Marsh
Affiliation:
Department of Civil Engineering, University of Calgary, Calgary, Alberta, Canada
Get access

Abstract

This paper gives physical and chemical properties of some Canadian fly ashes. Specific surface area, magnetic fraction, water soluble fraction and fraction finer than 45 μm were determined as part of the physical tests. Thermo-gravimetric analyses (TGA) in oxygen and nitrogen were conducted on raw ash samples. The change of pH with time in suspensions of the different ashes in water was also determined. Pozzolanic activity of the ashes with lime for all the ashes was evaluated to measure ash reactivity.

The ash activity seems to be related to fineness of the ash measured by the Blaine air permeability method, but not to the fineness measured by nitrogen sorption. Generally the greater the specific surface area, the higher the reactivity of the ash. The correlation was, however, not strong and no other physical or chemical parameter measured in this investigation seems to be related to pozzolanic activity.

The results of pH and TGA tests indicated that the ashes differ in many respects from each other. The TGA data suggest that loss on-ignition in many of the ashes is not entirely due to the presence of unburned carbon. Specific surface area determined by various methods seems to provide different values. No characterization parameter was found that was uniquely related to coal type.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 86: Symposium N – Fly Ash and Coal Conversion By-Products III , 1986 , 113
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Joshi, R.C. and Rosauer, E.A., Am. Ceram. Soc. Bull. 52, 459–465 (1973).Google Scholar
2. Joshi, R.C. and Lam, D., Sources of Self-Cementitious Properties in Subbituminous Fly Ashes, University of Calgary Research Report No. CE81–6, 1981.Google Scholar
3. Sherwood, P.T. and Ryley, M.P., The Use of Stabilized Pulverized Fuel Ash in Road Construction, Road Research Laboratory Report No. 49, 1966.Google Scholar
4. Fowler, G.G. and Styron, R.W., in Proceedings of the Fifth International Ash Utilization Symposium, edited by Spencer, J.D. and Whieldon, C.E. Jr. (U.S. Dept. of Energy, Morgantown, WV, 1979) pp. 587–610.Google Scholar
5. Capp, J.P. and Spencer, J.D., Fly Ash Utilization - A summary of Applications to Technology, U.S. Bureau of Mines Information Circular No. 8485, 1970.Google Scholar
6. Pacowski, , in The Application of Brown Coal Fly Ash to Road Base Courses, FHWA-RD 79–101 (Federal Highway Administration, Washington, DC, 1979) pp. 79–101.Google Scholar