Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T07:30:09.665Z Has data issue: false hasContentIssue false
  • English
  • Français

Some Difficulties in the Assessment of Pore-Structure of High Performance Blended Cement Pastes

Published online by Cambridge University Press:  22 February 2011

Bryan K. Marsh  and
Robert L. Day
Bryan K. Marsh
Affiliation:
Department of Civil Engineering, The University of Calgary, Alberta, Canada
Robert L. Day
Affiliation:
Department of Civil Engineering, The University of Calgary, Alberta, Canada
Get access

Abstract

Partial replacement of cement by fly-ash allows the production of concretes with high strength and low permeability. The correct analysis and prediction of engineering behaviour requires a knowledge of the development of pore-structure of these materials. However, a study of the relationships between engineering and microstructural characteristics has revealed problems in the accurate assessment of pore-structure.

Porosities of plain and blended pastes were analysed by both helium pycnometry and mercury porosimetry. Pastes showing pozzolanic reaction gave values of helium porosity whidh were different from the mercury porosity (measured on the same sample); pastes showing no pozzolanic reaction gave equal values for mercury and helium porosity. Also, significant differences in porosity and pore-size distribution were found for identical specimens when prepared by different techniques, namely direct oven-drying and solventreplacement; these differences occurred whether there was pozzolanic reaction or not.

It is suggested that as well as experimental difficulties, there may be fundamental differences in the way pore-structure develops in plain and blended cement pastes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 42: Symposium L – Very High Strength Cement-Based Materials , 1984 , 113
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Ramachandran, V.S., Feldman, R.F. and Beaudoin, J.J., Concrete Science Treatise on Current Research, (Heyden, London, 1981).Google Scholar
[2] Nyame, B.K. and Illston, J.M., 7th International Congress on the Chemistry of Cement, Paris, 1980, Vol III, pp VI: 181–185.Google Scholar
[3] Mehta, P.K. and Manmohan, D., 7th International Congress on the Chemistry of Cement, Paris, 1980, Vol III, pp VII: 1–5.Google Scholar
[4] Marsh, B.K., PhD thesis, the Hatfield Polytechnic, Herts., U.K., (1984).Google Scholar
[5] Marsh, B.K., Day, R.L., Bonner, D.G. and Illston, J.M., RILEM/CNR Symposium on the Principles and Applications of Pore Structural Characterization, Milan, Italy, (1983).Google Scholar
[6] Beaudoin, J.J., Cem. and Concr. Res., Vol.9, 6, 771–781 (1979).Google Scholar
[7] Feldman, R.F., First Intnl. Conference on the Use of Fly Ash, Silica Fume, Slag and Other Mineral By-Products in Concrete, Montebello, Canada, Aug. 1983. Amer. Concr. Inst. publication SP-79, Vol I, 415–433 (1983).Google Scholar
[8] Feldman, R.F., J. Amer. Ceram. Soc., Vol.67, 1, 30–33 (1984).Google Scholar
[9] Modry, S. and Hejduk, J., 7th International Congress on the Chemistry of Cement, Paris, 1980, Vol III, pp VI: 387–389.Google Scholar
[10] Feldman, R.F., Cem. and Concr. Res., Vol.1, 285–300 (1971).10.1016/0008-8846(71)90004-4CrossRefGoogle Scholar