Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-27T02:21:31.427Z Has data issue: false hasContentIssue false

Sol-Gel Chemistry by Ring-Opening Polymerization

Published online by Cambridge University Press:  10 February 2011

Kamyar Rahimian
Affiliation:
Catalysts Department, Sandia National Laboratories, Albuquerque, NM 87185–1407, [email protected]
Douglas A. Loy
Affiliation:
Catalysts Department, Sandia National Laboratories, Albuquerque, NM 87185–1407, [email protected]
Get access

Abstract

Sol-gel processing of materials is plagued by shrinkage during polymerization of the alkoxide monomers and processing (aging and drying) of the resulting gels. We have developed a new class of hybrid organic-inorganic materials based on the solventless ring-opening polymerization (ROP) of monomers bearing the 2,2,5,5-tetramethyl-2,5-disilaoxacyclopentyl group, which permits us to drastically reduce shrinkage in sol-gel processed materials. Because the monomers are polymerized through a chain growth mechanism catalyzed by base rather than the step growth mechanism normally used in sol-gel systems, hydrolysis and condensation products are entirely eliminated. Furthermore, since water is not required for hydrolysis, an alcohol solvent is not necessary. Monomers with two disilaoxacyclopentyl groups, separated by a rigid phenylene group or a more flexible alkylene group, were prepared through disilylation of the corresponding diacetylenes, followed by ring closure and hydrogenation. Anionic polymerization of these materials, either neat or with 2,2,5,5-tetramethyl-2,5-disila-1-oxacyclopentane as a copolymer, affords thermally stable transparent gels with no visible shrinkage. These materials provide an easy route to the introduction of sol-gel type materials in encapsulation of microelectronics, which we have successfully demonstrated.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Brinker, C. J., Scherer, G. W., Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing, Academic Press, Inc.: San Diego, 1996.Google Scholar
[2] Loy, D. A., Shea, K. J., Chem. Rev. 1995, 95, 1431.10.1021/cr00037a013Google Scholar
[3] Ellsworh, M. W., Novak, B. M., Chem. Mater. 1993, 5, 839.10.1021/cm00030a020Google Scholar
[4] Sadhir, R. K., Luck, R. M., Expanding Monomers: Synthesis, Characterization, and Applications, CRC Press, 1992.Google Scholar
[5] Loy, D. A., Rahimian, K., Samara, M., Angew. Chem. Int. Ed., 1999, 38, 555.10.1002/(SICI)1521-3773(19990215)38:4<555::AID-ANIE555>3.0.CO;2-#3.0.CO;2-#>Google Scholar
[6] Seyferth, D., Robison, J., Macromolecules, 1993, 26, 407.10.1021/ma00055a001Google Scholar
[7] Small, J. H., Shea, K. J., Loy, D. A., J. Non-cryst. Solids, 1993, 1.Google Scholar