Article contents
Selective Area Cell Adhesion on Amorphous Silicon Using Patterned Self-Assembled Monolayers
Published online by Cambridge University Press: 17 March 2011
Abstract
The compatibility of inorganic materials with living tissues and biological compounds is crucial in many areas, including medical diagnostics, biosensors, drug delivery, etc. In this work, we are interested in the interaction of living mammalian cells with semiconductor surfaces for novel thin-film biosensor devices. Amorphous silicon may give advantages over crystalline silicon for some devices because of its large-area, low-temperature compatibility, and its large optical absorption coefficient in the visible spectrum. Amorphous silicon thin films (500Å) deposited on quartz glass were cleaned using ambient UV/O3 treatment, leaving the surface largely OH-terminated and hydrophilic. The hydrophilic surface was then exposed to a vapor of octyltrichlorosilane (CH3(CH2)7SiCl3, OTS). The resulting surface was strongly hydrophobic, with advancing contact angles with water <106°. This organic surface was masked to reserve areas of uncoated hydrophilic substrate, and placed in a cell culture (BHK-21 cells) to observe cell adhesion and proliferation. A high degree of cell attachment was observed on the UV/O3-treated surfaces (~400 cells/mm2) compared to ~450 cells/mm2 on the culture dish control surface, indicating cell proliferation and growth. Little cell adhesion occurred on the hydrophobic organiccoated surface (~40 cells/mm2), and the cells remained round and only minimally attached. On masked surfaces, the organic-free areas showed dense, well-adhered cell growth while the coated areas showed much fewer and rounded cells. On all samples as well as control surfaces, cell death was <1%. These results suggest a means for selectively controlling cell adhesion to thin film electronic device surfaces, through the patterning of hydrophobic surface coatings.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2000
References
REFERENCES
- 2
- Cited by