Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-27T02:23:34.915Z Has data issue: false hasContentIssue false
  • English
  • Français

Refractive Index Modification During Deposition of Silicon Oxynitride Films Prepared by Reactive Laser Ablation

Published online by Cambridge University Press:  15 February 2011

R. Machorro ,
G. Soto ,
E. C. Samano  and
L. Cota-Araiza
R. Machorro
Affiliation:
CeCiMac, UNAM, A. Postal 2681, 22800 Ensenada B.C., México
G. Soto
Affiliation:
CeCiMac, UNAM, A. Postal 2681, 22800 Ensenada B.C., México
E. C. Samano
Affiliation:
CeCiMac, UNAM, A. Postal 2681, 22800 Ensenada B.C., México
L. Cota-Araiza
Affiliation:
Also at CICESE, Posgrado en Física de Materiales, Ensenada B.C., México
Get access

Abstract

Inhomogeneous low-k thin films of SiOxNy have been deposited by laser ablation of a Si3N4 sintered target in presence of oxygen gas. The high oxidation rate of silicon nitride has been used to control the stoichiometry of the films by modifying the oxygen partial pressure. The refractive index of the deposited material was able to be tailored at any value between 1.47 (SiO2) to 2.03 (Si3N4) by this approach. In situ optical characterization of the growing films was possible using kinetic and spectro ellipsometry. The refractive index was determined by applying the Effective Medium Approximation (EMA) and considering a mixture of SiO2, Si3N4, and voids. The volumetric composition obtained by ellipsometry was compared to the results determined by AES and XPS characterization. The purpose of this application is to show that reactive PLD can be used to produce high quality optical filters.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 526: Symposium Y – Advances in Laser Ablation of Materials , 1998 , 97
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Macleod, H.A., Thin-film oplicalfilters, Adam Hilger Ltd. 1986 2d Ed.Google Scholar
2. Greenham, A.C., Nichols, B.A., Wood, R.M., and Noursharg, N., Opt. Eng. 32, 1018–1024 (1193)Google Scholar
3. Gunning, W.J., Hal, R.L. Woodberry, F.J., Southwell, W.H., and Gluck, N.S., Appl. Opt. 28, 2945–2948 (1989).Google Scholar
4. Callard, S., Gagnaire, A. and Joseph, J., Fabrication and characterization of graded refractive index silicon oxinitride thin films, J. Vac. Sci. Technol. A 15, 2088 (1997)Google Scholar
5. Fogarassy, E., Fuchs, C., Slaoui, A., Unamuno, S. and Stoquert, J., Low-temperature synthesis of silicon oxide, oxynitrided and nitride films by pulsed excimer laser ablation, J. Appl. Phys. 76, 2612 (1994)Google Scholar
6. Soto, G., Samano, E. C., Machorro, R., Avalos, M. and Cota, L., Microstructural identification of SiNxfilms by real-time ellipsometry, Proc. MRS Vol. XX, 1997 Google Scholar
7. Moulder, J. F., Stickle, W. F., Sobol, P. E., and Bomben, K. D., Handbook of X-ray photoelectron spectroscopy, Perkin-Elmer Corporation, 1992.Google Scholar
8. , Movchan and Demchishin, A.V., Phys. Mat. Mettalog. 28, 83 (1969)Google Scholar
9. , Thorton, J. Vac. Sci. Technol. 11, 666 (1975) and 12, 830 (1975)Google Scholar
10. Aspnes, D.E., Thin Solid Films 89, 249 (1982).Google Scholar
11. Parjadis de Lariviere, G., Frigeiro, J.M., Rivory, J., and Abeles, F., Appl. Opt. 31, 6056 (1992).Google Scholar