Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-23T05:12:22.695Z Has data issue: false hasContentIssue false
  • English
  • Français

A Rapid Screening Method for Investigating the Effect of Processing Parameters on CdTe/CdS Solar Cell Performance

Published online by Cambridge University Press:  31 January 2011

Mohammed Al Turkestani ,
Ken Durose ,
Ben Wakeling ,
David Lane ,
Stuart Irvine  and
Vincent Barrioz
Mohammed Al Turkestani
Affiliation:
[email protected], Durham University, Physics Department, South Road, Durham, DH1 3LE, United Kingdom
Ken Durose
Affiliation:
[email protected], Durham University, Physics Department, Durham, United Kingdom
Ben Wakeling
Affiliation:
[email protected], Cranfield University, Dept of Materials and Medical Sciences, Swindon, United Kingdom
David Lane
Affiliation:
[email protected], Cranfield University, Dept of Materials and Medical Sciences, Swindon, United Kingdom
Stuart Irvine
Affiliation:
[email protected], Glyndŵr University, Centre for Solar Energy Research, St Asaph, United Kingdom
Vincent Barrioz
Affiliation:
[email protected], Glyndŵr University, Centre for Solar Energy Research, St Asaph, United Kingdom
Get access

Abstract

A rapid screening method is reported in which material processing parameters are investigated as a function of the CdTe absorber thickness in CdTe/CdS solar cells. It has been used to investigate i) the optimum absorber thickness for CdCl2 processing at 380°C for 10 mins, and ii) the effect on device performance of post-growth annealing of CdS layer with H2, N2, and O2. It was found that the optimum thickness of CdTe compatible with the processing was ∼3μm. The device results were independent of the post-growth treatment of the CdS for the conditions investigated here. The bevel method allowed for ∼30 data points to be obtained from each sample, this giving a significant advantage over conventional experimental methods.

Keywords

CdTeS
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1165: Symposium M – Thin-Film Compound Semiconductor Photovoltaics–2009 , 2009 , 1165-M05-17
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Turkestani, M. K. Al and Durose, K.. A Rapid Screening Study of the Influence on Interfaces and Thickness on CdTe/CdS Solar Cells, Conference Record of PVSAT-4, Bath, UK, 2008 pp. 105–108.Google Scholar
2. Ketipearachchi, Udaya S., Lane, David W., Rogers, Keith D., Painter, Jonathan D., and Cousins, Michael A., Mater. Res. Soc. Symp. Proc. 836, 161–166 (2004).Google Scholar
3. Hädrich, M., Lorenz, N., Metzner, H., Reislöhner, U., Mack, S., Gossla, M. and Witthuhn, W., Thin Solid Films 515, 5804 (2007).Google Scholar
4. Greengrass, S. and Durose, K, unpublished work.Google Scholar