Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-25T15:28:08.730Z Has data issue: false hasContentIssue false
  • English
  • Français

Rapid Prototyping of Ceramic Based Photonic Bandgap Structures

Published online by Cambridge University Press:  17 March 2011

Jennifer Synowczynski ,
Samuel Hirsch  and
Bonnie Gersten
Jennifer Synowczynski
Affiliation:
Weapons and Materials Research Directorate, Army Research Laboratory Aberdeen Proving Grounds, MD 21005-5069
Samuel Hirsch
Affiliation:
Weapons and Materials Research Directorate, Army Research Laboratory Aberdeen Proving Grounds, MD 21005-5069
Bonnie Gersten
Affiliation:
Weapons and Materials Research Directorate, Army Research Laboratory Aberdeen Proving Grounds, MD 21005-5069
Get access

Abstract

A three-dimensional photonic bandgap (PBG) structure was fabricated from CAD models using a method based on lost wax rapid prototyping and ceramic gelcasting. The inverse PBG mold was constructed from a low melting point thermoplastic using a high precision Sanders Rapid Toolmaker. An aqueous stable slurry (200-300 cp) containing 50-75wt% of the ceramic powders (BaSrTiO3, MgO), a 15wt% solution of monomer (Methacylamide) and crosslinker (Poly(ethylene glycol) dimethacrylate), and a free radical initiator (2,2'Azobis(2-amidino-propane) dihydrochloride) was cast into the mold. A polymerization reaction was thermally activated at 50°C to immobilize the ceramic powders. The wax mold was then removed by drying the green body in a high humidity oven at 120°C. Scanning Electron Microscopy (SEM) of the unfired part showed that atmosphere hampered the polymerization reaction at the surface of the part. The green density, sintered density, and permittivity all increased as the solids loading increased. In order to optimize the dielectric properties and minimize cracking and warping in the sintered part, the solids loading had to be greater than 80 wt%. This study investigated several steps in the lost mold / gelcasting procedure including stabilizing the ceramic suspension, the correlation between the solids loading and the green and sintered densities, binder removal, and the effect of shrinkage during sintering on the net shape.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 698: Symposia Q/EE Electroative Polymers and Rapid Prototyping , 2001 , Q2.2.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Brown, E. R., McMahon, O. B., and Parker, C. D., Lincoln Laboratory Journal 11 159 (1998).Google Scholar
2. Thevenot, M. et al, IEEE Trans. Micro.Theory Tech. 47 2115 (1999).Google Scholar
3. Johnson, S. and Joannopoulos, J. D., Appl. Phys. Letters 77 3490–3492 (2000).Google Scholar
4. Synowczynski, J. et al, Integrated Ferroelectrics 22 861 (1998).Google Scholar
5. Visconte, P. et al., Microelectronic Engineering, 33 391 (2000)Google Scholar
6. Omatete, O., Janney, M., and Nunn, S., J. Eur. Cer. Soc. 17 407 (1997)Google Scholar