Hostname: page-component-cd9895bd7-gbm5v Total loading time: 0 Render date: 2024-12-27T02:21:45.029Z Has data issue: false hasContentIssue false
  • English
  • Français

Proton Exchange Membrane Synthesized by Pore-Filling Polymerization Technique

Published online by Cambridge University Press:  10 May 2012

Siok Wei Tay ,
Zhaolin Liu  and
Liang Hong
Siok Wei Tay
Affiliation:
Institute of Materials Research & Engineering, 3 Research Link, Singapore 117602
Zhaolin Liu
Affiliation:
Institute of Materials Research & Engineering, 3 Research Link, Singapore 117602
Liang Hong*
Affiliation:
Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore 117576. Institute of Materials Research & Engineering, 3 Research Link, Singapore 117602
*
*Email: [email protected]
Get access

Abstract

Proton exchange membrane with interconnected H+-transfer channels in submicron scale has been synthesized by means of pore filling polymerization. Polysulfone (PSU) membrane containing densely distributed pores is synthesized using the phase inversion approach. The membrane is then filled up with a designed formula consisting of monomers (e.g. 2-acrylamido-2-methylpropane sulphonic acid and N, N’-Methylenebisacrylamide) and a binary solvent. It is undertaken through solution diffusion of the monomer formula into the pores impregnated with the bore liquid. When the PSU matrix loaded with monomers is subjected to polymerization, a uniform distribution of interconnected H+-transfer channels is realized. This special membrane structure gives rise to a maximum ionic exchange capacity of 2.43 meq/g and the highest proton conductivity of 0.2 S/cm. Compared to the commercial Nafion® membrane, the pore-filled membrane significantly enhances the power output of H2-PEM fuel cell.

Keywords

polymerizationporositysolvent casting
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1410: Symposium DD – Transport Properties in Polymer Nanocomposites II , 2012 , mrsf11-1410-dd07-01
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Stimming, U., De Haart, L. G. S., Meusinger, J., Fuel Cell Systems: PEMFC for Mobile and SOFC for Stationary Application , Wiley-VCH Verlag GmbH, 2005.Google Scholar
2. Heitner-Wirguin, C., J. Membr. Sci., 120 (1996) 1.Google Scholar
3. Yamaguchi, T., Miyata, F., Nakaoa, S., J. Membr. Sci., 214(2003) 283.Google Scholar
4. Salam, A., Ulbricht, M., Macromol. Mater. Eng., 292 (2007) 310.Google Scholar
5. Zhang, X., Tay, S.W., Liu, Z., Hong, L., J. Power Sources, 196, Issue 13, 1 July 2011, Pages 5494–5498 Google Scholar
6. Li, N. N., Fane, A. G., Ho, W. S. W., Matsuura, T., Fabrication of Hollow-Fiber Membranes by Phase Inversion, Advanced Membrane Technology and Applications , John Wiley & Sons, Inc., 2008, p 821.Google Scholar
7. Lu, Z., Polizos, G., Macdonald, D. D., and Maniasa, E., J. Electrochem. Soc., 155(2) (2008) B163–B171.Google Scholar