Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-25T15:42:50.810Z Has data issue: false hasContentIssue false
  • English
  • Français

Progress in Producing Large Area Flexible Dye Sensitized Solar Cells

Published online by Cambridge University Press:  01 February 2011

Krishna C. Mandal ,
Michael Choi ,
Caleb Noblitt  and
R. David Rauh
Krishna C. Mandal
Affiliation:
EIC Laboratories, Inc., 111 Downey Street, Norwood, MA 02062–2612, USA
Michael Choi
Affiliation:
EIC Laboratories, Inc., 111 Downey Street, Norwood, MA 02062–2612, USA
Caleb Noblitt
Affiliation:
EIC Laboratories, Inc., 111 Downey Street, Norwood, MA 02062–2612, USA
R. David Rauh
Affiliation:
EIC Laboratories, Inc., 111 Downey Street, Norwood, MA 02062–2612, USA
Get access

Abstract

Dye sensitized nanocrystalline TiO2 solar cells have been reported with over 11% efficiency and are extremely promising as very low cost and lightweight photovoltaic sources. However, most reports are for cells of low area fabricated on glass, which withstands processing temperatures of ∼450°C. In this paper, we describe the fabrication and performance of cells made on flexible ITO-coated polyethylene terephthalate (PET) substrates with 6” × 3” dimensions. To improve the efficiency in the cells, we enhanced the ITO current collection efficiency with metallization fingers. The fingers resulted in a >10 fold increase in short-circuit current under normal solar illumination compared to cells without metallization. Further improvements were realized by passivating the metallization fingers at the metal/polymer electrolyte interface.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 836: Symposium L – Materials for Photovoltaics , 2004 , L1.2
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. O'Regan, B. and Grätzel, M., Nature (London) 335, 737 (1991);Google Scholar
Grätzel, M., J. Photochem. Photobiol. A 164, 3 (2004).Google Scholar
2. Mandal, Krishna C., Smirnov, Anton, Peramunage, D., and David Rauh, R., (Mater. Res. Soc. 737, Boston, MA, 2003) pp. 739–744.Google Scholar
3. See, for example, Burgers, A. R., Prog. Photovolt: Res. Appl. 7, 457 (1999).Google Scholar
4. Okada, K., Matsui, H., Kawashima, T., Ezure, T. and Tanabe, N., J. Photochem. Photobiol. A 164, 193 (2004).Google Scholar