Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-25T15:39:42.802Z Has data issue: false hasContentIssue false
  • English
  • Français

Processing and Oxidation of Nitride Stabilized 18Cr-20Ni Stainless Steel

Published online by Cambridge University Press:  15 February 2011

C. S. McDowell ,
S. N. Basu  and
T. Ando
C. S. McDowell
Affiliation:
Department of Manufacturing Engineering, Boston University, Boston, MA 02215
S. N. Basu
Affiliation:
Department of Manufacturing Engineering, Boston University, Boston, MA 02215
T. Ando
Affiliation:
Department of Mechanical Engineering, Tufts University, Medford, MA, 02155
Get access

Abstract

The present investigation explores the use of nitride precipitates for grain-size stabilization in a 18Cr-2ONi austenitic stainless steel for high temperature applications in oxidizing atmospheres. The potential for reductions in alloying contents of such steels has become a focus of research out of concern for the conservation of strategic alloying elements such as Cr. In order for the alloy to maintain superior oxidation resistance, it must sustain a fine grain size by virtue of effective grain boundary pinning by stable precipitates.

Al and Ti microalloyed 18Cr-20Ni steels have been nitrided using rapid solidification processing (spray forming) and subjected to thermomechanical treatments to precipitate nitrides from the supersaturated solid solutions. The spray formed deposits were cold rolled to increase the density of dislocations, which act as sites for nucleation of nitride precipitates. The alloys were then annealed to nucleate and grow the precipitates, followed by cold rolling and recrystallization to generate a stable, fine grained microstructure. The Ti-microalloyed steel demonstrated high-temperature grain size stability by maintaining a grain size of≈7μm after 600h at 1000°C.

The Ti-microalloyed steel has been subjected to isothermal oxidation in air at 900°C. The results of preliminary oxidation experiments are reported. The spray deposited and thermomechanically processed alloy demonstrated high-temperature oxidation behavior superior to conventionally processed (hot rolled and annealed) alloys.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 362: Symposium J – Grain-Size and Mechanical Properties--Fundamentals and Applications , 1994 , 111
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1) Matsuo, S., Ando, T., Zody, M. C.and Grant, N.J., Advances in Powder Metallurgy, vol.5 P/M Materials, Proc. 1991 Powder Metallurgy Conference and Exhibition, Chicago, IL, June 9–12, 161 (1991).Google Scholar
2) Matsuo, S., Ando, T. and Grant, N.J., Proc. Symp. on Melt Spinning and Strip Casting, (Mattys, E., ed.), TMS 1992 Ann. Meet. San Diego, CA, 173 (1992).Google Scholar
3) Ucok, I., Ando, T. and Grant, N. J., Mat. Sci. Eng. Vol.133A, pp. 284 (1991).Google Scholar
4) Basu, S. N.and Yurek, G. J., Oxid. Metals 36 (3/4), 281 (1991).Google Scholar
5) Basu, S. N.and Yurek, G. J., Oxid. Metals 35 (5/6), 441 (1991).Google Scholar
6) Evans, H. E., Hilton, D. A., Holm, R. A. and Webster, S. J., Oxid. Metals 14(3), 235 (1980).Google Scholar
7) Funkenbush, A. W., Smeggil, J. G.and Bornstein, N. S., Metall. Trans. 16A, 1164 (1985).Google Scholar
8) Brown, E.L. et. al., Met. trans., Vol.14A, No. 5, pp 7.Google Scholar
9) Hansen, S. S., Sande, J. B. Vander and Cohen, Morris, Met. Trans., Vol IIA, 387 (1980).Google Scholar
10) Yurek, G. J., Eisen, D. and Reed, A. Garatt, MetalL Trans. A 13A, 473 (1982).Google Scholar