Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-25T18:01:52.389Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of YBCO Platelets and Films by Mod and Microwave Heating

Published online by Cambridge University Press:  10 February 2011

C. Manfredotti ,
M. Castighioni ,
P. Polesello ,
N. Rizzi  and
P. Volpe
C. Manfredotti
Affiliation:
Experimental Physics Dept. University of Turin, Torino (ITALY)
M. Castighioni
Affiliation:
General and Organic Applied Chemistry, University of Turin, Torino (ITALY)
P. Polesello
Affiliation:
Experimental Physics Dept. University of Turin, Torino (ITALY)
N. Rizzi
Affiliation:
Experimental Physics Dept. University of Turin, Torino (ITALY)
P. Volpe
Affiliation:
General and Organic Applied Chemistry, University of Turin, Torino (ITALY)
Get access

Abstract

Metal Organic Deposition (MOD) technique, which represents a flexible method for obtaining both platelets and films of YBCO, is based on baking, pyrolyzing and annealing stages of neodecanoates solutions. The annealing step is generally very long. The whole annealing stage can be simply substituted by a heat treatment (about 1 h) in a commercial microwave (MW) oven, followed by a 15 min. annealing at 900°C in a resistive furnace without oxygenation. With this process, YBCO platelets, films and wires were obtained starting from powders prepared by MO (Metal-Oxide). XRD patterns are indicative of a strong texturing by the evidence of (003) and (005) lines. By the same technique, YBCO films were prepared by spray deposition on A12O 3 for a total thickness of about 5 μm, each spray step, of 1 gm, was followed by 5 min pyrolysis at 500 °C and 1 h MW annealing.

The MW technique was also used for preparation of quartz and ceramic fibers covered by YBCO.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 430: Symposium O – Microwave Processing of Materials V , 1996 , 145
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Manfredotti, C., Fizzotti, F., Boero, M., Rellecati, P., Mauro, L., Volpe, P., Andreone, D., Mat. Res. Soc. Symp. Proc., 275, 257 (1992)Google Scholar
[2] Mingos, et al., Nature, 332, 311,(1988).Google Scholar
[3] Laishevtseva, et al., Russ.J.Inorg.Chem., 37, 855 (1992).Google Scholar
[4] Zakharon, et al., Russ.J.Inorg.Chem., 35, 163, (1990).Google Scholar
[5] Rao, Chandrasekhar et al., Superc.Sci.Tech., 7, 713, (1994).Google Scholar