Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-05T15:51:29.716Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of TiFe thin Films by Pulsed Ion Beam Evaporation

Published online by Cambridge University Press:  17 March 2011

Hisayuki Suematsu ,
Tsuyoshi Saikusa ,
Tsuneo Suzuki ,
Weihua Jiang  and
Kiyoshi Yatsui
Hisayuki Suematsu
Affiliation:
Extreme Energy-Density Research Institute, Nagaoka University of Technology, Nagaoka 940-2188, Japan
Tsuyoshi Saikusa
Affiliation:
Extreme Energy-Density Research Institute, Nagaoka University of Technology, Nagaoka 940-2188, Japan
Tsuneo Suzuki
Affiliation:
Extreme Energy-Density Research Institute, Nagaoka University of Technology, Nagaoka 940-2188, Japan
Weihua Jiang
Affiliation:
Extreme Energy-Density Research Institute, Nagaoka University of Technology, Nagaoka 940-2188, Japan
Kiyoshi Yatsui
Affiliation:
Extreme Energy-Density Research Institute, Nagaoka University of Technology, Nagaoka 940-2188, Japan
Get access

Abstract

Thin films of titanium iron (TiFe) were prepared by a pulsed ion-beam evaporation (IBE) method. A pulsed ion beam of proton accelerated at 1 MV (peak) with a pulse width of 50 ns and a current of 70 kA was focused on TiFe alloy targets. Soda lime glass substrates were placed in front of the targets. Phases in the thin films were identified by X-ray diffraction (XRD). XRD results revealed that the thin films deposited on the glass substrates consist of a TiFe phase. Crystallized Ti-Fe thin films without oxides were successfully obtained. Surface roughness of the thin film was 0.16 m m.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 697: Symposium P – Surface Engineering 2001--Fundamentals and Applications , January 2001 , P5.17
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Tamura, H., Hydrogen storage alloy -Fundamentals and Frontier Technologies (N. T. S., 1998)[in Japanese].Google Scholar
2. Nakamura, K., Script. Metal. 18, 793–797 (797).Google Scholar
3. Sakai, T., Ishikawa, H., Miyamura, H., Kuriyama, N., Yamada, S. and Iwasaki, T., J. Electrochem. Soc. 138, 908–915 (915).Google Scholar
4. Adachi, G., Nagai, H. and Shoikawa, J., J. Less-Common Met. 97, L9–L10 (1984).Google Scholar
5. Sakaguchi, H., Yagi, Y., Shiokawa, J. and Adachi, G., J. Less-Common Met. 149, 185–191 (191).Google Scholar
6. Nakamura, K., Ber Bunsenges Phys.Chem 89, 191–197 (197).Google Scholar
7. Yatsui, K., Laser and Particle Beams 7, 733–741 (741).Google Scholar
8. Yatsui, K., Sonegawa, T., Ohtomo, K. and Jiang, W., Materials Chemistry and Physics 54, 219–223 (223).Google Scholar
9. Sengiku, M., Oda, Y., Jiang, W., Yatsui, K., Kato, K., Shinbo, K. and Kaneko, F., Jpn. J. Appl. Phys. 40, 1035–1037 (1037).Google Scholar
10. Kitajima, K., Suzuki, T., Jiang, W. and Yatsui, K., Jpn. J. Appl. Phys. 40, 1030–1034 (1034).Google Scholar
11. Ray, R., Giessen, B. C. and Grant, N. J., Mettal. Trans. 3, 627–629 (629).Google Scholar