Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-29T10:45:30.524Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of La1.61GeO5-δ Based Oxide Ion Conducting Film by Pulsed Laser Deposition Method and its Application for SOFC

Published online by Cambridge University Press:  01 February 2011

Tatsumi Ishihara  and
Jingwang Yan
Tatsumi Ishihara
Affiliation:
Department of Applied Chemistry, Faculty of Engineering, Kyushu University, Higashi-ku, Fukuoka, 812–8581, Japan.
Jingwang Yan
Affiliation:
Department of Applied Chemistry, Faculty of Engineering, Kyushu University, Higashi-ku, Fukuoka, 812–8581, Japan.
Get access

Abstract

La1.61GeO5 thin film was fabricated on porous NiO-Ce0.80Sm0.20O2-δ (SDC) substrates by pulsed laser deposition (PLD) under various deposition conditions and the deposition parameters were optimized for obtaining the dense La1.61GeO5-δ film for the electrolyte of SOFC. It has been found that the high substrate temperature and the low oxygen pressure in chamber are suitable for obtaining the dense La1.61GeO5-δ thin film on porous NiO-SDC anode substrate. Since the as-deposited film is amorphous state, post-anneal treatment is essential for obtaining the crystalline La1.61GeO5-δ film. Under the optimized deposition condition, a dense and La1.61GeO5-δ thin film with a thickness of 3 μm can be successfully obtained. The obtained La1.61GeO5-δ film exhibits the electromotive force, which is slightly smaller that that of the theoretical open circuit potential. The power generation property of the cell using the obtained La1.61GeO5-δ film was studied and it was found that the maximum output density of a SOFC single cell using a La1.61GeO5-δ thin film deposited on a porous NiO-SDC substrate reached to 1948.2 mW/cm2 at 1173 K and 424.4 mW/cm2 at 873 K.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 835: Symposium K – Solid-State Ionics , 2004 , K7.7
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sahibzada, M., Steele, B. C. H., Barth, D., Rudkin, R. A. and Metcalfe, I. S., Fuel 1999, 78, 639.Google Scholar
2. Minh, N., Anumakonda, A., Chung, B., Doshi, R., Ferrall, J., Lear, G., Montgomery, K., Ong, E., Schipper, L. and Yamanis, J., Fuel Cells Bulletin 1999, 2, 9.Google Scholar
3. Sata, N., Eberman, K., Maier, J., Nature 2000, 408, 946.Google Scholar
4. Kim, S., Maier, J., J. Electrochem. Soc. 149, J73–J83 (2002).Google Scholar
5. Ishihara, T., Arikawa, H., Akbay, T., Nishiguchi, N., Takita, Y., J. Am. Chem. Soc. 2001, 123, 203.Google Scholar
6. Ishihara, T., Arikawa, H., Nishiguchi, H., Takita, Y., Solid State Ionics 2002, 154–155, 455.Google Scholar