Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-17T15:04:16.115Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of High Surface Area Ni-SDC Cermets Using a Surfactant-Assisted Co-Precipitation Method

Published online by Cambridge University Press:  01 February 2011

Sang Joon Park ,
Tae Wook Eom ,
Jae Eun Oh ,
Hae Kwang Yang  and
Kyung Hwan Kim
Sang Joon Park
Affiliation:
[email protected], Kyungwon University, Chemical & Bio Engineering, Soojung-Ku, Bokjungdong, San 65, Dept. of Chemical & Bio Engineering, Seongnam, N/A, N/A, Korea, Republic of
Tae Wook Eom
Affiliation:
[email protected], Kyungwon University, Chemical & Bio Engineering, Seongnam, N/A, N/A, Korea, Republic of
Jae Eun Oh
Affiliation:
[email protected], Kyungwon University, Chemical & Bio Engineering, Seongnam, N/A, N/A, Korea, Republic of
Hae Kwang Yang
Affiliation:
[email protected], Kyungwon University, Chemical & Bio Engineering, Seongnam, N/A, N/A, Korea, Republic of
Kyung Hwan Kim
Affiliation:
[email protected], Kyungwon University, Electrical Engineering, Seongnam, N/A, Korea, Republic of
Get access

Abstract

A surfactant-assisted co-precipitation method was employed for obtaining high surface area Ni-SDC with improved structural properties for SOFC applications. In the work, a cationic surfactant, cetyltrimethylammonium bromide(CTAB) was employed with NiCl2, SmCl3 and CeCl3 as precursors and NH4OH as mineralizer. The elimination of surfactants upon calcination gives rise to the formation of high surface area NiO-SDC. When calcined at 600°C, the powders with surface area of 249 m2/g, were obtained and the pore size was 14.45 nm. The powders consist of two phases, the cubic NiO and SDC confirmed with X-ray diffraction identification.

Keywords

nanostructurepowder metallurgyCe
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 942: Symposium W – Colloidal Materials – Synthesis, Structure, and Applications , 2006 , 0942-W11-31
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Stambouli, A. Boudghene, Traversa, E., Renewable and Sustainable Energy Reviews. 6, 433 (2002).Google Scholar
2 Williford, R.E., Journal of Electron Spectroscopy and related pheomena. 150, 171 (2006).Google Scholar
3 Berkel, F. P. F. van, Heuveln, F. H. van and Huijsmans, J. P. P., Solid State Ionic. 72, 240 (1994).Google Scholar
4 Steele, B. C. H.. Solid State Ionics. 94, 239 (1997).Google Scholar
5 Kharton, V.V., Marques, F.M.B., Atkinson, A., Solid State Ionics. 174, 135 (2004).Google Scholar
6 Mamak, Marc, Coombs, Neil, Ozin, Geoffrey A., Chem. Mater. 13, 3564 (2001).Google Scholar
7 Lenormand, Pascal, Castillo, Simone, Gonzalez, Jose-Ramon, Laberty-Robert, Christel, Ansart, Florence, Solid State Sciences. 7, 159 (2005).Google Scholar
8 Zhu, Bin, Liu, Xiangrong, Schober, T., Electrochem. Communication. 6, 278 (2004).Google Scholar
9 Fang, Xiaohong, Zhu, Guangyan, Xia, Changrong, Liu, Xingqin, Meng, Guangyao, Solid State Ionics. 168, 31 (2004).Google Scholar
10 Li, Ji-Guang, Ikegami, Takayasu, Mori, Toshiyuki, Wada, Toshiaki, Chem. Mater. 13, 2913 (2001).Google Scholar
11 Jenkins, R., and Snyder, R. L. in Introduction to X-ray Powder Diffractometry, edited by Winefordner, J. D. (Wiley Interscince, 1996) pp. 89–90.Google Scholar
12 Terribile, Daniela, Trovarelli, Alessandro, Llorca, Jordi, Leitenburg, Carla de, Dolcetti, Giuliano, Catalysis Today. 43, 79 (1998).Google Scholar